Changing Presser Foot - Singer Stylist 7258 Instruction Manual

更换压脚

CHANGING PRESSER FOOT

确认机针处在最高位，提起压脚提升杆。
1. 按压脚柄后方的释放按钮，移去压脚。
2. 将想要使用的压脚放在针板上，压脚的销对准压脚柄
的凹槽。
3. 放下压脚提升杆，使压脚柄扣住压脚销。
Be sure needle is in the up position. Raise presser foot lifter.
1. Push presser foot release lever to remove the foot.
2. Place the desired foot on the needle plate aligning the presser
foot pin with the foot holder.
3. Lower the presser foot lifter so that the foot holder snaps on the
foot.
压脚提升杆
Presser foot lifter
压脚释放钮
Foot release lever
压脚柄
Foot holder
19