Picking Up Bobbin Thread - Singer Stylist 7258 Instruction Manual

引下线

PICKING UP BOBBIN THREAD

1. 提起压脚提升杆
Raise the presser foot lifter.
2. 左手轻拉上线线头，右手逆时针转动手轮，使针下降
至针板内，继续转动手轮直到针回到最高位置。
Holding needle thread loosely with your left hand, turn hand
wheel toward you (counter-clockwise) with your right hand,
first lowering the needle and continuing until the needle comes
to its highest position.
提示：有一个快速引下线的方法。选择直线缝线迹，
按一下倒缝按钮。机针将向下、再向上，转一周回到
上位。
NOTE: A quick way to pick up the bobbin thread is, with
straight stitch selected, touch and release the reverse switch.
Your machine will perform one down-up cycle and stop with
the needle up. Always stopping with the needle "fully up" is
one of the features of your computer sewing machine.
3. 慢慢地拉扯上线，使下线穿过针板孔拉出。
Lightly pull up the top thread, and pick up bobbin thread, which
will appear through the needle plate slot.
4. 将上线和下线一起从压脚缺口下方往后拉出约 15 厘米。
Pull both top and bobbin threads together toward the back of the
machine under the presser foot, leaving about 6" (15 cm) clear.
15