Canceling The Function For Meter/Gauge Needle Movement And Combination Meter Sequential Illumination Upon Turning On The Ignition Switch - Subaru 2005 Legacy Owner's Manual

Instruments and controls
! Canceling the function for meter/
gauge needle movement and combina-
tion meter sequential illumination
upon turning on the ignition switch
It is possible to activate or deactivate the movement of
the meter needles and gauge needles and sequential
illumination of the combination meter that take place
when the ignition switch is turned to the "ON" position.
Turn the ignition switch to the "ACC" position. With the
A trip meter indication selected, briefly press the trip
knob twice. You can now establish the activated/deac-
tivated setting for movement of the meter needles and
gauge needles when the ignition switch is turned to
3-8
the "ON" position. To change the current setting, press
the trip knob for at least two seconds.
: Activated
: Deactivated
Briefly press the trip knob again. You can now estab-
lish the activated/deactivated setting for sequential il-
lumination of the combination meter when the ignition
switch is turned to the "ON" position. To change the
current setting, press the trip knob for at least two sec-
onds.
: Activated
: Deactivated