Extreme Networks ExtremeWireless AP510i Installation Manual page 26

Mount the Access Point Using the Main Mounting
Bracket to a Flat T-bar
Procedure
1. Remove the ceiling tiles, push and rotate the main mounting bracket onto the T-bar in such a way
that the center angled locking tabs of the main bracket gets attached to the T-bar.
Figure 12: Attach the main mounting bracket to a T-bar
2. Attach the access point to the main mounting bracket.
3. Hold the AP and rock it back and forth to ensure it is securely mounted.
4. Replace the tiles.
5. Attach the Ethernet cable's RJ45 connector to the LAN1 port.
26 ExtremeWireless™ AP510i Access Point Installation Guide
Installation Process