EVGA Z390 FTW User Manual page 70

EVGA Z390 FTW (123-CS-E397)
Once the process has started you will see the status change to "Rebuilding."
**Important Notice**: The controller will not begin the rebuilding process until you
have booted back into Windows; this queues the rebuild but does not start the process.
The rebuilding duration will vary. Fast drives in uncomplicated arrays with small
amounts of data can rebuild very quickly. Large platter drive-based arrays, especially in
RAID5, can take several hours to rebuild. The duration of the rebuild process will
further increase based on the usage of both the array and the CPU during the process.
The rebuild process can be monitored from the "Intel Rapid Storage Technology"
®
utility in Windows, which is effectively the software front-end for the Intel SATA
®
controller. The rebuild status can be viewed in the "Manage" tab, located on the top of
the IRST Window. Please see the image at the top of Page 80 to see an example of
where to find the rebuilding % in the IRST.
- 70 -