EVGA Z390 FTW User Manual page 129

EVGA Z390 FTW (123-CS-E397)
The non-CPU Vcore voltages do not utilize the Adaptive or Override voltage settings.
Instead, these use a pulldown menu to select preset voltages, as shown in the image
below. The voltages for these components are set by detection during POST, and E-
LEET will open the pulldown to the currently detected voltage. Please be careful when
adjusting voltages, as there are risks to running electronics out of spec. Although
EVGA warranties overclocking, other components are manufactured by different
brands (i.e. RAM and CPU), which may have different policies towards overclocking.
When your changes are complete, click "Apply Selection" at the bottom, or return to
defaults by clicking the "Restore" button.
E-LEET X also has the ability to change RGB
LED options. This includes motherboard
heatsinks attached to an RGB LED Header, or
devices plugged into the RGB Headers on the
motherboard, such as fans. To set the color and
RGB LED pattern, click on the LED tab. Set the
lighting pattern by using the dropdown box, and
change the color by clicking the color box next to
the dropdown box:
Below is the voltage range list within E-LEET for Coffee Lake-S processors:
This has been the E-LEET utility
overview, which should give you a
solid start to understanding and
using the E-LEET software suite.
- 129 -