Installing Drivers And Software; Windows 10 Driver Installation - EVGA Z390 FTW User Manual

EVGA Z390 FTW (123-CS-E397)
Note: It is important to remember that before installing the drivers included in the
kit, you must first load or install your operating system. The motherboard
natively supports 64bit versions of Windows 10.
The kit comes with a USB flash drive that contains utilities, drivers, and
additional software.
The USB flash drive that has been shipped with the EVGA Z390 FTW
Motherboard contains the following software and drivers:
Chipset Drivers

Audio Drivers

EVGA NU Audio Drivers

RAID Drivers

LAN Drivers

ME Drivers

EVGA E-LEET X

User's Manual


Windows 10 Driver Installation

1. Insert the USB flash drive included in your EVGA Z390 FTW
motherboard kit into a USB port on your case or a USB port on the
motherboard's rear I/O panel.
2. Double-click the "Autorun" application file.

Installing Drivers and Software

- 130 -