Lexmark MX517 User Manual page 242

Table of Contents

Advertisement

Troubleshooting
Replace imaging unit, 0 estimated pages remain [84.xy]
Replace the imaging unit to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the
User's Guide or visit www.lexmark.com.
Replace jammed originals if restarting job.
From the printer control panel, try one or more of the following:
Select Cancel job to clear the message and cancel the scan job. For non‑touch‑screen printer models,
press
to confirm.
Select Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job. For non‑touch‑screen printer models, press
Select Scan from flatbed to continue scanning from the scanner immediately after the last successful
scan job. For non‑touch‑screen printer models, press
Select Finish job without further scanning to end the last successful scan job. For non‑touch‑screen
printer models, press
Select Restart job to restart the scan job with the same settings from the previous scan job. For
non‑touch‑screen printer models, press
Replace maintenance kit [80.xy]
The printer is scheduled for maintenance. For more information, go to
contact your service representative, and then report the message.
Replace missing imaging unit [31.xy]
Install the missing imaging unit. For more information, see the instruction sheet that came with the supply.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
For more information, see the instruction sheet that came with the supply.
This error can also be caused by installing a genuine Lexmark cartridge, such as a high yield cartridge, that
is not intended to be used in this product.
The following error codes indicate that a non‑genuine Lexmark toner cartridge is installed:
32.13
32.16
32.19
32.22
32.25
to confirm.
to confirm.
to confirm.
to confirm.
http://support.lexmark.com
242
or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx417Mx510Mx511Mx4107015470 ... Show all

Table of Contents