Lexmark MX517 User Manual page 191

Understanding the printer menus
Use
Enhance Fine Lines
On
Off
Gray Correction
Auto
Off
Brightness
‑6 to 6
Contrast
0–5
Job Accounting menu
Note: This menu item appears only when a printer hard disk is installed. Make sure that the hard disk is not
read/write‑ or write‑protected.
Use
Job Accounting Log
Off
On
Job Accounting Utilities
Accounting Log Frequency
Daily
Weekly
Monthly
Log Action at End of Frequency
None
E‑mail Current Log
E‑mail & Delete Current Log
Post Current Log
Post & Delete Current Log
Log Near Full Level
Off
1–99
To
Enable a print mode preferable for files such as architectural drawings, maps,
electrical circuit diagrams, and flow charts.
Notes:
•
Off is the factory default setting.
•
To set this option using the Embedded Web Server, type the network printer
IP address in the Web browser address field.
Automatically adjust the contrast enhancement applied to images.
Note: Auto is the factory default setting.
Adjust the printed output either by lightening or darkening it. You can conserve
toner by lightening the output.
Note: 0 is the factory default setting.
Adjust the contrast of printed objects.
Note: 0 is the factory default setting.
To
Set if the printer creates a log of the print jobs it receives.
Note: Off is the factory default setting.
Print and delete log files or export them to a flash drive.
Set how often a log file is created.
Note: Monthly is the factory default setting.
Set how the printer responds when the frequency threshold expires.
Note: None is the factory default setting.
Specify the maximum size of the log file before the printer executes the Log
Action at Near Full.
Note: 5 is the factory default setting.
191