Bucket Seats - Pontiac 1999 Montana Owner's Manual

-
6. Attach the mini buckle so that the safety belt is
ready for use when a passenger uses the seat.
The buckle reattaches by pushing the latch into the
buckle until the red center pops out again.
Repeat these steps for the other section of the split
bench seat.
CAUTION:
A safety belt that is twisted or not properly
attached won't provide the protection needed in a
crash. The person wearing the belt could be
seriously injured. After installing the seat, always
check to be sure that the safety belts are not
twisted and are properly attached.
1-14

Bucket Seats

There are three types of rear bucket seats: RIGHT
ONLY, CENTER OR LEFT and LEFT ONLY.
RIGHT ONLY and LEFT ONLY seats may be equipped
-
with the built in child restraint option.
The rear bucket seats can be removed to provide extra
storage. Each seat that has the built
option fits in only one location in your vehicle, but seats
-
that don't have the built in child restraint option can be
moved to different rows.
Folding or Reclining the Seatbacks
The seatback on a bucket seat can be either folded down
or reclined. The following explains how to use either the
nylon strap or the lever to fold or recline the seatback.
-
in child restraint
To fold down the seatback,
pull this nylon strap on the
rear of the seat.
yellowblue