Table of Contents
Advertisement
Change the LCD Screen Display
You can change the brightness and the time-out for the LCD.
Change the LCD Screen Display Settings From a Web
Browser
To change the display screen settings:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Advanced Settings > Device.
The Device page displays.
5. To change the screen brightness, select Screen Brightness and then use the slider
to specify the brightness.
6. To configure the LED, select LED.
7. To configure screen lock, select Screen Lock and then set Screen Lock to On or Off.
8. To change the screen time-out, select Time-Out and then select the number of
minutes for the screen time-out.
9. Set WiFi Info on Home to On or Off.
10. Click the Apply button.
Your settings are saved.
Battery Tips
The following tips explain best practices for battery usage and care:
• Charge batteries in a room-temperature environment, which is generally between
68°F and 79° F (20°C and 26°C). Charging might be temporarily disabled if the
battery temperature exceeds 113°F (60°C). If the battery temperature is hot, but less
than 113°F (60°C), the battery charges, but at a slower rate than usual.
Manage Battery Usage and
Charging
Nighthawk M2 Model MR2100
30
User Manual
Advertisement
Table of Contents
