Reversing Unit - Canon SORTER S-82 Service Manual

B. Reversing Unit
1) Following the removal procedures of the
front and rear covers on Page 3-2, take
off the front and rear covers.
2) Open the top cover unit.
3) Remove the screw.
Screw
Figure 3-3-4
4) Remove the screw and then the LED
PCB.
Screw
Figure 3-3-5
LED PCB
5) Remove the screw and then the LED
PCB mount.
Screw
Figure 3-3-6
6) Remove the screw, cam tension spring
and then the reversing unit.
Screw

Reversing unit

Figure 3-3-7
CHAPTER 3
LED PCB mount
Cam tension spring
3 - 7