Yamaha MIO AL115S Owner's Manual page 69

ZAUU0155
1. Tail/brake light bulb
3. Remove the burnt out bulb from
the socket by pushing it in and
turning it counterclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise unit it stops.
5. Install the socket into its original
position, and then securely close
the seat.
Turn signal light bulb
1. Open the seat. (See page 4-8 for
seat opening and closing proce-
dures.)
PERIODIC MAINTENANCE AND ADJUSTMENT
ZAUU0156
1. Rear turn signal light bulb socket (x 2)
2. Remove the turn signal light bulb
socket by turning it counterclock-
wise.
ZAUU0157
1. Rear turn signal light bulb
3. Remove the burnt out bulb from
the socket by pulling it out.
4. Insert a new bulb into the socket.
7-32
5. Install the socket into its original
position, and then securely close
the seat.
7