Kickstarter
ZAUU0117
1. Kickstarter
If the engine fails to start by pushing
the start switch, try to start it by using
the kickstarter. To start the engine,
fold out the kickstarter lever, move it
down lightly with your foot until the
gears engage, and then push it down
smoothly but forcefully.
INSTRUMENT AND CONTROL FUNCTIONS
EAU37650
Seat
To open the seat
1. Insert the key in the lock, and
then turn it as shown.
2. Fold the seat up.
ZAUU0118
1. Seat lock
2. Seat
To close the seat
1. Fold the seat down, and then
push it down to lock it in place.
2. Remove the key.
TIP
_
Make sure that the seat is properly se-
cured before riding.
_
4-8
EAU13891
Helmet holders
ZAUU0119
1. Seat lock
2. Helmet holders
The helmet holders are located under
the seat.
To secure a helmet to a helmet
holder
1. Open the seat. (See page 4-8.)
2. Attach a helmet to a helmet hold-
er, and then securely close the
seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss
of control and possibly an acci-
dent.
[EWA10161]
EAU37481
4