Trailer Recommendations - Hummer 2007 H3 Owner's Manual

Trailer Brake Control Wiring Harness
The trailer brake control wiring harness is located
under the instrument panel to the right of the
steering column. The wires are taped to the
harness that goes to the courtesy light under
the instrument panel. The harness will contain
the following wires:
•
Red Wire: AUX B+
•
Black Wire: Ground
•
Light Blue Wire: Brake Signal
•
Dark Blue Wire: Trailer Brakes
310

Trailer Recommendations

You must subtract your hitch loads from the
Cargo Weight Rating (CWR). CWR is the
maximum weight of the load your vehicle can
carry. It doesn't include the weight of the people
inside, but you can figure about 150 lbs. (68 kg)
for each seat. The total cargo load must not
be more than your vehicles CWR.
Weigh your vehicle with your trailer attached,
so that you won't go over the GVWR or GAWR.
If you are using a weight-distributing hitch,
weigh the vehicle without the spring bars in place.
You'll get the best performance if you spread
out the weight of your load the right way, and if
you choose the correct hitch and trailer brakes.
For more information see Towing a Trailer
on page 297.