Hummer 2007 H3 Owner's Manual page 220

BAND: Press this button to listen to the radio
when a CD is playing. The inactive CD(s) remains
safely inside the radio for future listening.
B
(CD): Press this button to play a CD while
listening to the radio. The CD symbol appears on
the display when a CD is loaded.
AUTO EQ (Automatic Equalization): Press
AUTO EQ to select an equalization setting while
playing a CD. The equalization is set whenever a
CD is played. See "AUTO EQ" listed previously for
more information. If you select an EQ setting for
your CD, it is activated each time you play a CD.
Using Song List Mode
R
(Song List): The six-disc CD changer has a
feature called song list. This feature is capable
of saving 20 track selections.
To save tracks into the song list feature, perform
the following steps:
1. Turn the CD player on and load it with at least
one CD. See "LOAD CD" listed previously in
this section for more information.
2. Check to see that the CD changer is not in
song list mode. S-LIST should not appear on
the display. If S-LIST is present, press the
song list button to turn it off.
220
3. Select the desired CD by pressing the
numbered pushbutton and then use the SEEK
SCAN right arrow to locate the track to be
saved. The track begins to play.
4. Press and hold the song list button to save
the track into memory. When the song list
button is pressed, one beep sounds. After
two seconds of continuously pressing the song
list button, two beeps sounds to confirm the
track has been saved.
5. Repeat Steps 3 and 4 for saving other
selections.
S-LIST FULL displays if you try to save more than
20 selections.
To play the song list, press the song list button.
One beep sounds and S-LIST displays. The
recorded tracks begins to play in the order they
were saved.
Seek through the song list by using the SEEK
SCAN arrows. Seeking past the last saved track
returns to the first saved track.