Dic Operation And Displays - GMC 2008 Envoy Denali Owner's Manual

3
(Trip Information): Press this button to display
the odometer, trip odometers, tire pressure, and timer.
t
(Fuel Information): Press this button to display
the current range, fuel used, average fuel economy,
and engine oil life.
4
(Customization): Press this button to access the
vehicle settings menu and customize the personal
settings on your vehicle.
r
(Select): Press this button to reset certain DIC
functions and set your customization settings.
Pressing any of the DIC buttons will acknowledge DIC
messages and clear them from the DIC display.
3-50

DIC Operation and Displays

The DIC comes on when the ignition is on. After a short
delay the DIC will display the information that was
last displayed before the engine was turned off.
If a problem is detected, a warning message will appear
on the display. Pressing the trip stem will acknowledge
any warning or service messages. Pressing any of
the DIC steering wheel buttons — trip information, fuel
information, customization, or select button — will
also acknowledge any warnings or service messages.
You should take any message that appears on the
display seriously and remember that clearing the
message will only make the message disappear,
not correct the problem.
The DIC has different modes which can be accessed by
pressing the four DIC buttons located on the steering
wheel. These buttons are trip information, fuel
information, customization, and select. The button
functions are detailed in the following pages.