Service Tire Monitor - GMC 2008 Envoy Denali Owner's Manual

Hide thumbs Also See for 2008 Envoy Denali:
Table of Contents

Advertisement

SERVICE TIRE MONITOR

This message displays if a part on the Tire Pressure
Monitor System (TPMS) is not working properly. The tire
pressure light also flashes and then remains on during
the same ignition cycle. See Tire Pressure Light on
page 3-41. Several conditions may cause this message
to appear. See Tire Pressure Monitor Operation on
page 5-69 for more information. If the warning comes on
and stays on, there may be a problem with the TPMS.
See your dealer/retailer.
STABILITRAK ACTIVE
This message displays anytime the StabiliTrak
activates to maintain vehicle stability. Any combination
of engine speed management, brake traction control,
and stability control displays this message.
STABILITRAK NOT READY
This message may display if driving conditions delay
®
StabiliTrak
system initialization. This is normal.
Once the system initializes, this message will no
longer be displayed on the DIC.
STABILITRAK OFF
This message displays when you press the StabiliTrak
button for more than five seconds or when stability control
has been automatically disabled. The StabiliTrak
is located on the transmission shift handle. To limit
wheel spin and realize the full benefits of the stability
enhancement system, you should normally leave
StabiliTrak
if your vehicle gets stuck in sand, mud, ice, or snow and
you want to rock your vehicle to attempt to free it, or if you
are driving in extreme off-road conditions and require
more wheel spin. See If Your Vehicle is Stuck in Sand,
Mud, Ice, or Snow on page 4-33. To turn the StabiliTrak
®
system
system back on, press the StabiliTrak
There are several conditions that can cause this
message to appear.
The message may display if the brake system
warning light is on. See Brake System Warning
Light on page 3-38.
The message displays if the vehicle is shifted
into 4LO.
The message turns off as soon as the conditions that
caused the message to be displayed are no longer
present.
®
on. However, you should turn StabiliTrak
®
®
button
®
off
®
®
button again.
3-57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents