Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - GMC 2008 Envoy Denali Owner's Manual

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
•
G Turn and Lane Change Signals
•
23 Headlamp High/Low-Beam Changer
•
Flash-to-Pass Feature
•
N Windshield Wipers
•
J
Windshield Washer
I
•
Cruise Control

Turn and Lane-Change Signals

The turn signal has two upward and two downward
positions.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever returns automatically.
To signal a lane change, raise or lower the lever until
the arrow starts to flash. Hold it there until your lane
change is completed. The lever returns by itself when
released.
If the arrows flash more quickly than normal, a signal
bulb could be burned out. Replace the bulb. If the arrows
do not go on at all when you signal a turn, check the
fuse. See Fuses and Circuit Breakers on page 5-110
and check for burned-out bulbs.
If you have a trailer towing option with added wiring for
the trailer lamps, a turn signal flasher is used. With this
flasher installed, the signal indicator flashes even if a turn
signal bulb is burned out. Check the front and rear turn
signal lamps regularly to make sure they are working.
An arrow on the instrument
panel cluster flashes in the
direction of the turn or
lane change.
3-7