Page 1 2008 GMC Yukon Denali/Yukon XL Denali Owner Manual Seats and Restraint Systems ......1-1 Driving Your Vehicle ........4-1 Your Driving, the Road, and Your Vehicle ..4-2 Front Seats ..........1-2 Towing ........... 4-40 Rear Seats ..........1-9 Service and Appearance Care ......5-1 Safety Belts ..........
Page 2: Canadian Owners
For vehicles ﬁrst sold in Canada, substitute the name “General Motors of On peut obtenir un exemplaire de ce guide en français Canada Limited” for GMC whenever it appears in this auprès de concessionnaire ou à l’adresse suivante: manual.
Page 3: Using This Manual
Using this Manual CAUTION: Many people read the owner manual from beginning to end when they ﬁrst receive their new vehicle to learn about the vehicle’s features and controls. Pictures These mean there is something that could hurt and words work together to explain things. you or other people.
Page 4: Vehicle Symbols
Vehicle Damage Warnings Vehicle Symbols You will also ﬁnd notices in this manual. The vehicle has components and labels that use symbols instead of text. Symbols are shown along with Notice: These mean there is something that could the text describing the operation or information damage your vehicle.
Page 5: Table Of Contents
Section 1 Seats and Restraint Systems Front Seats ............1-2 Where to Put the Restraint ......1-58 Power Seats ..........1-2 Lower Anchors and Tethers for Children Power Lumbar ..........1-3 (LATCH) ..........1-60 Heated Seats ..........1-4 Securing a Child Restraint in a Rear Memory Seat, Mirrors, and Pedals ....1-4 Seat Position ..........1-68 Power Reclining Seatbacks ......1-6 Securing a Child Restraint in the Center...
Page 6: Front Seats
Front Seats The power seat controls are located on the outboard side of the front seats. • Move the seat forward or rearward by sliding the Power Seats control forward or rearward. • Raise or lower the front part of the seat cushion by moving the front of the control up or down.
Page 7: Power Lumbar
Power Lumbar • To raise the height of the support, press and hold the top of the control. • To lower the height of the support, press and hold the bottom of the control. Let go of the control when the lower seatback reaches the desired level of support.
Page 8: Heated Seats
Heated Seats to turn the heat to the seat off. Indicator lights above the button will show the level of heat selected: three for high, two for medium, and one for low. The seats have the heated The heated seats will be canceled ten seconds after the seat feature, the buttons ignition is turned off.
Page 9 To save your positions in memory, do the following: If you use the remote keyless entry transmitter to enter your vehicle and the remote recall memory feature 1. Adjust the driver’s seat, including the seatback is on, automatic seat, mirror, and adjustable pedal recliner and lumbar, both outside mirrors, and movement will occur.
Page 10: Power Reclining Seatbacks
Easy Exit Seat Power Reclining Seatbacks The control for this feature is located on the driver’s door panel between buttons 1 and 2. With the vehicle in PARK (P), the exit position can be recalled by pressing the exit button. You will hear a single beep.
Page 11 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job. In a crash, you could go into it, receiving neck or other injuries.
Page 12: Head Restraints
Head Restraints Pull the head restraint up to raise it. To lower the head restraint, press the release button (A), located on the top of the seatback, while you push the head restraint down. The front seats may have head restraints that also tilt forward and rearward.
Page 13: Second Row
Rear Seats A heated seat symbol will be shown in the RSA display to indicate that the feature is on. Press the button to cycle through the temperature settings of high, medium, Heated Seats and low, and to turn it off. Indicator bars next to the symbol will designate the level of heat selected: three for The rear seats have the high, two for medium, and one for low.
Page 14 Manual Fold and Tumble Feature Folding and Tumbling the Seat(s) To fold and tumble the seat, do the following: 1. Make sure that there is nothing under, in front of, or on the seat. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts.
Page 15 3. Lift the same lever again to release the CAUTION: rear of the seat from the ﬂoor. The seat will tumble forward. If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there.
Page 16 Folding and Tumbling the Seat(s) from the Third Row Seats CAUTION: Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position.
Page 17 Automatic Release Fold and Tumble 2. From the front seats, press one of the Feature automatic seat release buttons located on The transmission must be in PARK (P) for this feature the overhead console. to work. Folding and Tumbling the Seat(s) CAUTION: Overhead Console Automatically folding and tumbling the seat...
Page 18 Returning the Seat(s) to the Sitting Position CAUTION: To return the seat to the sitting position, do the following: A safety belt that is improperly routed, not 1. Pull the seat down until it latches to the ﬂoor. The properly attached, or twisted will not provide seatback cannot be raised if the seat is not latched the protection needed in a crash.
Page 19 Folding and Tumbling the Second Row 2. Press the automatic seat release button Seat(s) from the Third Row Seats or located on the panel Outside behind the rear doors. CAUTION: Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash.
Page 20: Reclining Seatbacks
Bucket Seats (Second Row) Reclining Seatbacks To recline the seatback, do the following: If your vehicle has bucket seats, the seatbacks can be reclined, the seats can be folded for additional cargo space, or folded and tumbled for easy entry and exit to the third row seats, if your vehicle has them.
Page 21 Manual Fold and Tumble Feature To return the seatback to an upright position, do the following: Folding and Tumbling the Seat(s) 1. Lift the lever fully without applying pressure to the To fold and tumble the seat, do the following: seatback and the seatback will return to the upright 1.
Page 22 3. Lift the lever again to release the rear of the seat from the ﬂoor. The seat will tumble forward. The seatback will fold forward. Leaving the seatback in this position creates a ﬂat load ﬂoor. If the seatback cannot fold ﬂat, try moving the front seat forward and/or put the front seatback in the upright position.
Page 23 Returning the Seat(s) to the Sitting Folding and Tumbling the Seat(s) from the Position Third Row Seats To return the seat to the sitting position, do the following: CAUTION: 1. Pull the seat down until it latches to the ﬂoor. The seatback cannot be raised if the seat is not latched to the ﬂoor.
Page 24 Automatic Release Fold and Tumble 2. Lift the lever, located on the bottom rear of Feature the second row seat on the inboard side, to The transmission must be in PARK (P) for this feature release the seatback. to work. The seatback will Folding and Tumbling the Seat(s) fold forward.
Page 25 Returning the Seat(s) to the Sitting 2. From the front seats, press one of the Position automatic seat release To return the seat to the sitting position, do the following: buttons located on the overhead console. 1. Pull the seat down until it latches to the ﬂoor. The seatback cannot be raised if the seat is not latched to the ﬂoor.
Page 26 Folding and Tumbling the Second Row 2. Press the automatic seat release button Seat(s) from the Third Row Seats or located on the panel Outside behind the rear doors. CAUTION: Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash.
Page 27: Third Row Seat
Third Row Seat 3. Lift the release lever, located on the bottom rear of the seatback If the vehicle has a third row seat, the seatback(s) can on the outboard side of be folded and the entire seat can be tumbled, or the seat, and the removed from the vehicle.
Page 28 Unfolding the Seatback(s) Tumbling the Third Row Seat To return the seatback to the upright position, do the The seat can be tumbled forward for additional cargo following: space. 1. Open the liftgate to access the controls for the seat. To tumble the seat, do the following: 2.
Page 29 4. Unlatch the seat from 3. Release the seat from the tumbled position by lifting the ﬂoor by lifting the the lever located next to the carrying handle at the lever located next bottom rear of the seat. to the carrying handle 4.
Page 30 Removing the Third Row Seat Installing the Third Row Seat To remove the seat, do the following: To install the seat, do the following: 1. Open the liftgate to access the controls for the seat. 1. Open the liftgate to access the rear of the vehicle. 2.
Page 31 4. Push and pull on the seat to make sure it is locked into place. The seatback cannot be raised to the CAUTION: upright position unless the seat is secured to the ﬂoor. A safety belt that is improperly routed, not 5.
Page 32: Safety Belts
Safety Belts CAUTION: Safety Belts: They Are for Everyone It is extremely dangerous to ride in a cargo area, This part of the manual tells you how to use safety inside or outside of a vehicle. In a collision, belts properly. It also tells you some things you should people riding in these areas are more likely to not do with safety belts.
Page 33: Why Safety Belts Work
Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it is just a seat on wheels. 1-29...
Page 34 Get it up to speed. Then stop the vehicle. The rider The person keeps going until stopped by something. In does not stop. a real vehicle, it could be the windshield... 1-30...
Page 35 or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. 1-31...
Page 36 Questions and Answers About Safety If I am a good driver, and I never drive far from Belts home, why should I wear safety belts? You may be an excellent driver, but if you are in a crash — even one that is not your fault — you and Will I be trapped in the vehicle after a crash if I your passenger(s) can be hurt.
Page 37: How To Wear Safety Belts Properly
How to Wear Safety Belts Properly This section is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see Older Children on page 1-49 or Infants and Young Children on page 1-52.
Page 38 What is wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt snugly against your body. The shoulder belt is too loose.
Page 39 What is wrong with this? CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
Page 40 What is wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones.
Page 41 What is wrong with this? CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries.
Page 42 What is wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
Page 43 What is wrong with this? CAUTION: You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt.
Page 44 What is wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to ﬁx it.
Page 45 Lap-Shoulder Belt All seating positions in your vehicle have a lap-shoulder except for the center front passenger position, if your vehicle has one, which has a lap belt. See Lap Belt on page 1-47 for more information. Here is how to wear a lap-shoulder belt properly. 1.
Page 46 4. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See “Shoulder Belt Height Adjustment” later in this section.
Page 47 Shoulder Belt Height Adjuster Safety Belt Pretensioners Your vehicle has a shoulder belt height adjuster for the Your vehicle has safety belt pretensioners for front driver and right front passenger position. outboard occupants. Although you cannot see them, they are part of the safety belt assembly. They can help Adjust the height so that the shoulder portion of the belt is tighten the safety belts during the early stages of a centered on your shoulder.
Page 48: Rear Safety Belt Comfort Guides
Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the belt away from the neck and head.
Page 49 2. Place the guide over the belt, and insert the two 3. Be sure that the belt is not twisted and it lies ﬂat. edges of the belt into the slots of the guide. The elastic cord must be under the belt and the guide on top.
Page 50 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
Page 51: Safety Belt Use During Pregnancy
Safety Belt Use During Pregnancy Lap Belt Safety belts work for everyone, including pregnant This part is only for the lap belt. To learn how to wear a women. Like all occupants, they are more likely to be lap-shoulder belt, see Lap-Shoulder Belt on page 1-41. seriously injured if they do not wear safety belts.
Page 52: Safety Belt Extender
Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt is not long enough, your dealer/retailer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
Page 53: Child Restraints
Child Restraints The manufacturer’s instructions that come with the booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder Older Children belt until the child passes the below ﬁt test: • Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue.
Page 54 What is the proper way to wear safety belts? CAUTION: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face Never do this. or neck. The lap belt should ﬁt snugly below the Here two children are wearing the same belt.
Page 55 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. In a crash, the child would not be restrained by the shoulder belt. The child might slide under the lap belt. The belt force would then be applied right on the abdomen.
Page 56: Infants And Young Children
Infants and Young Children CAUTION: Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes Children can be seriously injured or strangled the need, for everyone, to use safety restraints. In fact, if a shoulder belt is wrapped around their neck the law in every state in the United States and in and the safety belt continues to tighten.
Page 57 CAUTION: People should never hold an infant in their arms while riding in a vehicle. An infant does not weigh much — until a crash. During a crash an infant will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) infant will suddenly become a 240 lb (110 kg) force on a person’s arms.
Page 58 CAUTION: Children who are up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 59 For most basic types of child restraints, there are many different models available. When purchasing a CAUTION: child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle The body structure of a young child is quite safety standards.
Page 60 Child Restraint Systems A forward-facing child seat (B) provides restraint for the child’s body A rear-facing infant with the harness. seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.
Page 61 Securing an Add-On Child Restraint in the Vehicle CAUTION: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Make sure the child restraint is properly installed in the vehicle using the vehicle’s safety belt or LATCH system, following the instructions that came with that restraint, and also the instructions in...
Page 62: Where To Put The Restraint
Where to Put the Restraint When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this Accident statistics show that children are safer if they manual.
Page 63 CAUTION: CAUTION: A child in a rear-facing child restraint can be A child in a child restraint in the center front seriously injured or killed if the right front seat can be badly injured or killed by the passenger’s airbag inﬂates. This is because frontal airbags if they inﬂate.
Page 64: Lower Anchors And Tethers For Children (Latch)
Lower Anchors and Tethers for Lower Anchors Children (LATCH) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Page 65: Top Tether Anchor
Top Tether Anchor Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints with top tethers are designed for use with or without the top tether being attached.
Page 66 Lower Anchor and Top Tether Anchor (Top Tether Anchor): Locations Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors. (Top Tether Anchor): Seating positions with top tether anchors. Third Row — Two Passenger Second Row — 60/40 (Top Tether Anchor): Seating positions with top tether anchors.
Page 67 For models with a three passenger third row seat, see the information following for installing a child restraint with a top tether in the third row, if your vehicle has one. Never install two top tethers using the same top tether anchor.
Page 68 Second Row Seat — 60/40 Third Row Seat — Two or Three Passenger For models with 60/40 second row seating, the top For vehicles with a two passenger third row seat, there tether anchors are located at the bottom rear of the seat is one top tether anchor located at the bottom rear cushion for each seating position in the second row.
Page 69: Securing A Child Restraint Designed For The Latch System
Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that CAUTION: the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.
Page 70 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have CAUTION: lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Children can be seriously injured or strangled Refer to your child restraint manufacturer if a shoulder belt is wrapped around their neck...
Page 71 If the position you are If the position you are using does not have a using has an adjustable headrest or head restraint headrest or head restraint and you are using a and you are using a single tether, route the dual tether, route the tether tether over the seatback.
Page 72: Securing A Child Restraint In A Rear Seat Position
Securing a Child Restraint in a Rear In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be Seat Position attached. If your child restraint does not have the LATCH system, When securing a child restraint in a rear seating you will be using the safety belt to secure the child position, study the instructions that came with your child restraint in this position.
Page 73 3. Push the latch plate into the buckle until it clicks. 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if necessary.
Page 74 6. If your child restraint has a top tether, follow the child restraint manufacturer’s instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH) on page 1-60 for more information. 7. Push and pull the child restraint in different directions to be sure it is secure.
Page 75: Securing A Child Restraint In The Center Front Seat Position
Securing a Child Restraint in the Securing a Child Restraint in the Center Front Seat Position Right Front Seat Position Your vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to CAUTION: Put the Restraint on page 1-58.
Page 76 A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the CAUTION: (Continued) rear-facing child is so great, if the airbag deploys. If you secure a forward-facing child CAUTION: restraint in the right front seat, always move the front passenger seat as far back...
Page 77 Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored.
Page 78 5. Pull the rest of the shoulder belt all the way out of 6. To tighten the belt, push down on the child restraint, the retractor to set the lock. pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor.
Page 79: Airbag System
Airbag System If the airbag is off, the off indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. Your vehicle has the following airbags: If a child restraint has been installed and the on •...
Page 80 Airbags are designed to supplement the protection provided by safety belts. Even though today’s airbags CAUTION: are also designed to help reduce the risk of injury from the force of an inﬂating bag, all airbags must inﬂate very quickly to do their job. Frontal airbags are designed to deploy in moderate to severe frontal and near frontal Here are the most important things to know about the...
Page 81 CAUTION: CAUTION: Airbags inﬂate with great force, faster than the Airbags plus lap-shoulder belts offer the best blink of an eye. Anyone who is up against, or protection for adults, but not for young very close to, any airbag when it inﬂates can children and infants.
Page 82: Where Are The Airbags
Where Are the Airbags? There is an airbag readiness light on the instrument panel cluster, which shows the airbag symbol. The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See Airbag Readiness Light on page 3-34 for more information.
Page 83 Driver Side shown, Passenger Side similar The right front passenger’s frontal airbag is in the instrument panel on the passenger’s side. The roof-rail airbags for the driver, right front passenger, and second row outboard passengers are in the ceiling above the side windows. 1-79...
Page 84 CAUTION: If something is between an occupant and an airbag, the airbag might not inﬂate properly or it might force the object into that person causing severe injury or even death. The path of an inﬂating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other...
Page 85: When Should An Airbag Inﬂate
When Should an Airbag Inﬂate? Frontal airbags may inﬂate at different crash speeds. For example: Frontal airbags are designed to inﬂate in moderate to • If the vehicle hits a stationary object, the airbags severe frontal or near-frontal crashes to help reduce the could inﬂate at a different crash speed than if the potential for severe injuries mainly to the driver’s or vehicle hits a moving object.
Page 86 In addition, your vehicle has dual-stage frontal airbags. Roof-rail airbags are not intended to inﬂate in rear Dual-stage airbags adjust the restraint according to impacts. Both roof-rail airbags will deploy when either crash severity. Your vehicle has electronic frontal side of the vehicle is struck, or if the sensing system sensors, which help the sensing system distinguish predicts that the vehicle is about to roll over, or in between a moderate frontal impact and a more severe...
Page 87: What Makes An Airbag Inﬂate
What Makes an Airbag Inﬂate? How Does an Airbag Restrain? In a deployment event, the sensing system sends an In moderate to severe frontal or near frontal collisions, electrical signal triggering a release of gas from even belted occupants can contact the steering wheel or the inﬂator.
Page 88: What Will You See After An Airbag Inﬂates
What Will You See After an Airbag CAUTION: Inﬂates? After the frontal airbags inﬂate, they quickly deﬂate, so When an airbag inﬂates, there may be dust in quickly that some people may not even realize an the air. This dust could cause breathing airbag inﬂated.
Page 89: Passenger Sensing System
• Passenger Sensing System Airbags are designed to inﬂate only once. After an airbag inﬂates, you will need some new parts for Your vehicle has a passenger sensing system for the the airbag system. If you do not get them, the airbag right front passenger’s position.
Page 90 The passenger sensing system works with sensors that are part of the right front passenger’s seat and safety CAUTION: belt. The sensors are designed to detect the presence of a properly-seated occupant and determine if the right front passenger’s frontal airbag should be enabled (may A child in a rear-facing child restraint can be inﬂate) or not.
Page 91 The passenger sensing system is designed to turn off If a child restraint has been installed and the on the right front passenger’s frontal airbag if: indicator is lit, turn the vehicle off. Remove the child restraint from the vehicle and reinstall the child restraint •...
Page 92 The passenger sensing system is designed to enable (may inﬂate) the right front passenger’s frontal airbag anytime the system senses that a person of adult size is sitting properly in the right front passenger’s seat. When the passenger sensing system has allowed the airbag to be enabled, the on indicator will light and stay lit to remind you that the airbag is active.
Page 93 If you ever pull the shoulder portion of the belt out all A thick layer of additional material, such as a blanket or the way, you will engage the child restraint locking cushion, or aftermarket equipment such as seat feature. This may unintentionally cause the passenger covers, seat heaters, and seat massagers can affect sensing system to turn the airbag(s) off for some how well the passenger sensing system operates.
Page 94: Servicing Your Airbag-Equipped Vehicle
Servicing Your Airbag-Equipped Adding Equipment to Your Vehicle Airbag-Equipped Vehicle Airbags affect how your vehicle should be serviced. There are parts of the airbag system in several places Is there anything I might add to or change around your vehicle. Your dealer/retailer and the service about the vehicle that could keep the airbags manual have information about servicing your vehicle from working properly?
Page 95 In addition, your vehicle has a passenger sensing Because I have a disability, I have to get my system for the right front passenger’s position, vehicle modiﬁed. How can I ﬁnd out whether which includes sensors that are part of the this will affect my airbag system? passenger’s seat.
Page 96: Restraint System Check
Restraint System Check Airbags The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag Checking the Restraint Systems readiness light is working. See Airbag Readiness Light on page 3-34 for more information. Safety Belts Notice: If an airbag covering is damaged, opened, Now and then, make sure the safety belt reminder light or broken, the airbag may not work properly.
Page 97: Replacing Restraint System Parts After A Crash
Replacing Restraint System Parts If your vehicle has the LATCH system and it was being used during a crash, you may need new LATCH After a Crash system parts. New parts and repairs may be necessary even if the belt or LATCH system (if equipped), was not being used CAUTION: at the time of the crash.
Page 98 NOTES 1-94...
Page 99: Features And Controls
Section 2 Features and Controls Keys ...............2-3 Starting and Operating Your Vehicle ....2-25 Remote Keyless Entry (RKE) System ....2-4 New Vehicle Break-In ........2-25 Remote Keyless Entry (RKE) System Ignition Positions ..........2-26 Operation ...........2-5 Retained Accessory Power (RAP) ....2-27 Remote Vehicle Start ........2-8 Starting the Engine ........2-27 Adjustable Throttle and Brake Pedal ....2-29 Doors and Locks ..........2-10...
Page 100 Section 2 Features and Controls ® OnStar System ..........2-47 Instrument Panel Storage .......2-59 Center Console Storage .........2-59 Universal Home Remote System ......2-50 Luggage Carrier ...........2-59 Universal Home Remote System .....2-50 Rear Storage Area ........2-60 Universal Home Remote System Operation Convenience Net ..........2-60 (With Three Round LED) ......2-51 Cargo Cover ..........2-61 Storage Areas ..........2-58...
Page 101: Keys
Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and they could be seriously injured or killed if caught in the path of a closing...
Page 102: Remote Keyless Entry (Rke) System
See your dealer/retailer if a replacement key or This device complies with RSS-210 of Industry Canada. additional key is needed. Operation is subject to the following two conditions: 1. This device may not cause interference. Notice: If you ever lock your keys in your vehicle, you may have to damage the vehicle to get in.
Page 103 Remote Keyless Entry (RKE) System Operation The vehicle’s doors can be locked and unlocked from about 3 feet (1 m) up to 65 feet (20 m) away with the Remote Keyless Entry (RKE) transmitter. If your vehicle has the remote start feature you can also start your vehicle with the RKE transmitter.
Page 104 " (Lock): Press to lock all the doors. Pressing on the RKE transmitter will disarm the content theft-deterrent system. See Content If enabled through the Driver Information Center (DIC), Theft-Deterrent on page 2-22. the turn signal lamps will ﬂash once to indicate locking has occurred.
Page 105 Matching Transmitter(s) to Your Vehicle Each RKE transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer/retailer. All transmitters need to be re-coded to match the new transmitter. The lost transmitter will no longer work after the new transmitters are re-coded.
Page 106: Remote Vehicle Start
Remote Vehicle Start Laws in some communities may restrict the use of remote starters. For example, some laws may require a person using the remote start to have the vehicle in Your vehicle may have a remote starting feature. This view when doing so.
Page 107 To start the vehicle using the remote start feature: To manually shut off a remote start, do any of the following: 1. Aim the transmitter at the vehicle. • Aim the RKE transmitter at the vehicle and press 2. Press and release the transmitter’s lock button. The the remote start button until the parking lamps vehicle’s doors will lock.
Page 108: Doors And Locks
Doors and Locks The vehicle cannot be remote started if the key is in the ignition, the hood is not closed, or if there is an emission control system malfunction and the check Door Locks engine light comes on. Also, the engine will turn off during a remote vehicle start if the coolant temperature gets too high or if the oil pressure gets low.
Page 109: Power Door Locks
There are several ways to lock and unlock your vehicle. Pressing the power lock switch twice or the lock button on the RKE transmitter twice will override the delayed From the outside, use the Remote Keyless Entry (RKE) locking feature and immediately lock all the doors. transmitter or the key in the driver’s door.
Page 110: Rear Door Security Locks
Rear Door Security Locks When you want to open a rear door when the security lock is on, do the following: Your vehicle has rear door security locks. These prevent 1. Unlock the door by lifting the rear door manual lock, passengers from opening the rear doors from the inside.
Page 111: Liftgate/Liftglass
Liftgate/Liftglass CAUTION: (Continued) • CAUTION: If you have air outlets on or under the instrument panel, open them all the way. • If your vehicle is equipped with a power It can be dangerous to drive with the liftglass or liftgate, disable the power liftgate function.
Page 112 To open the entire liftgate, press the power liftgate release button on the RKE or in the vehicle. See Power Liftgate on page 2-15. You can also press the touchpad on the underside of the liftgate handle (B). The liftgate will open after a slight delay. The vehicle must be in PARK (P) to open the liftgate.
Page 113: Power Liftgate
Power Liftgate CAUTION: (Continued) Power Liftgate Operation • If you have air outlets on or under the instrument panel, open them all the way. CAUTION: • If your vehicle has a power liftgate, disable the power liftgate function. See Power Liftgate on page 2-15. It can be dangerous to drive with the liftgate open because carbon monoxide (CO) gas can come into your vehicle.
Page 114 The taillamps will ﬂash and a chime will sound when the The power liftgate can be power opened and closed in power liftgate is moving. the following ways: • Press and hold the power liftgate button on the Remote Keyless Entry (RKE) transmitter until CAUTION: the liftgate starts moving.
Page 115 Obstacle Detection Features The power liftgate may be temporarily disabled under extreme temperatures, or under low battery conditions. If the liftgate encounters an obstacle during a power If this occurs, the liftgate can still be operated open or close cycle, a warning chime will sound and the manually.
Page 116: Power Running Boards
Manual Operation of Power Liftgate Power Running Boards To change the liftgate to manual operation, press the Your vehicle may have power running boards. switch on the center console to the OFF position. The power running boards automatically extend from With the power liftgate disabled and all of the doors beneath the vehicle on the side in which the door unlocked, the liftgate can be manually opened and...
Page 117: Windows
Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 118: Power Windows
Power Windows The power window controls are located on each of the side doors. CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome from extreme heat in warm or hot weather and suffer permanent injuries or even death from heat stroke.
Page 119: Sun Visors
Express-Down Windows Sun Visors Windows with an express-down feature allow the Pull the sun visor down to block glare. Detach the sun windows to be lowered without holding the switch. Press visor from the center mount and slide it along the down fully on the window switch, then release, to rod from side-to-side to cover the driver or passenger activate the express-down mode.
Page 120: Content Theft-Deterrent
Content Theft-Deterrent If a locked door is opened without using the RKE transmitter, a ten second pre-alarm will occur. The horn will chirp and the lights will ﬂash. If the key is not Your vehicle has a content theft-deterrent alarm system. placed in the ignition and turned to START or the door This is the security light.
Page 121: Testing The Alarm
® Testing the Alarm PASS-Key III+ To test the alarm: ® The PASS-Key III+ system operates on a radio frequency subject to Federal Communications 1. From inside the vehicle, lower the driver’s window Commission (FCC) Rules and with Industry Canada. and open the driver’s door.
Page 122: Pass-Key Iii+ Operation
® PASS-Key III+ Operation If the engine still does not start, and the key appears to be undamaged, try another ignition key. At this time, ® you may also want to check the fuse, see Fuses Your vehicle has PASS-Key III+ (Personalized and Circuit Breakers on page 5-108.
Page 123: Starting And Operating Your Vehicle
Starting and Operating Your To program the new additional key: 1. Verify that the new key has a stamped on it. Vehicle 2. Insert the original, already programmed, key in the ignition and start the engine. If the engine will not New Vehicle Break-In start, see your dealer/retailer for service.
Page 124: Ignition Positions
Ignition Positions A (LOCK/OFF): This position locks the ignition and transmission. It is a theft-deterrent feature. The key can only be removed when the ignition is turned to Use the key to turn the LOCK/OFF. ignition switch to four different positions. Notice: Using a tool to force the key from the ignition switch could cause damage or break the key.
Page 125: Retained Accessory Power (Rap)
Retained Accessory Power (RAP) C (ON/RUN): This is the position for driving. It is the position the ignition switch returns to after the engine starts, and the key is released. The following vehicle accessories can be used for up to 10 minutes after the engine is turned off: The battery could be drained if you leave the key in the •...
Page 126: Starting Procedure
Starting Procedure 2. If the engine does not start after 5-10 seconds, especially in very cold weather (below 0°F or −18°C), 1. With your foot off the accelerator pedal, turn the it could be ﬂooded with too much gasoline. Try ignition key to START.
Page 127: Adjustable Throttle And Brake Pedal
Adjustable Throttle and Brake Pedal Press the arrow at the bottom of the switch to move the pedals closer to your body. Press the arrow at the top of the switch to move the pedals away from your body. On vehicles with this feature, you can change the position of the throttle and brake pedals.
Page 128: Automatic Transmission Operation
Automatic Transmission Operation 3. Plug the cord into a normal, grounded 110-volt AC outlet. ® Your vehicle has a Hydra-Matic 6L80 automatic transmission, and has an electronic shift position CAUTION: indicator within the instrument panel cluster. The electronic shift position indicator displays when the shift lever is moved out of PARK (P).
Page 129 To rock your vehicle back and forth to get out of snow, ice, or sand without damaging your transmission, see If CAUTION: Your Vehicle is Stuck in Sand, Mud, Ice, or Snow on page 4-32. It is dangerous to get out of your vehicle if the NEUTRAL (N): In this position, your engine does not shift lever is not fully in PARK (P) with the connect with the wheels.
Page 130 DRIVE (D): This position is for normal driving. It Notice: Spinning the tires or holding the vehicle in provides the best fuel economy for your vehicle. If you one place on a hill using only the accelerator need more power for passing, and you are: pedal may damage the transmission.
Page 131 Range Selection Mode When in the MANUAL MODE (M) a number displays next to the M, indicating the current gear that has been selected. The number displayed in the gear indicator is the highest gear that can be used. However, your vehicle can automatically shift to lower gears as it adjusts to driving conditions.
Page 132: Tow/Haul Mode
Tow/Haul Mode Press the button located on the end of the shift lever to turn the tow/haul on or off. When the tow/haul is on, a light on the instrument panel cluster will come on. See Tow/Haul Mode Light on page 3-47 for more information.
Page 133: Parking Brake
The tow/haul mode and grade braking shift modes can be activated by pressing the button on the end of the shift control stalk. While in the DSC mode, grade braking is deactivated, allowing the driver to select a gear. See Automatic Transmission Operation on page 2-30 for more information.
Page 134: Shifting Into Park (P)
Shifting Into PARK (P) Leaving Your Vehicle With the Engine Running CAUTION: CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with It can be dangerous to leave your vehicle with the parking brake ﬁrmly set.
Page 135: Shifting Out Of Park (P)
Torque Lock The shift lock release is always functional except in the case of an uncharged or low voltage (less than 9 volt) If you are parking on a hill and you do not shift your battery. transmission into PARK (P) properly, the weight of the If your vehicle has an uncharged battery or a battery vehicle can put too much force on the parking pawl in the with low voltage, try charging or jump starting the...
Page 136: Parking Over Things That Burn
Parking Over Things That Burn Engine Exhaust CAUTION: CAUTION: Things that can burn could touch hot exhaust Engine exhaust can kill. It contains the gas parts under your vehicle and ignite. Do not carbon monoxide (CO), which you cannot see or park over papers, leaves, dry grass, or other smell.
Page 137: Running The Engine While Parked
Running the Engine While Parked CAUTION: It is better not to park with the engine running. But if you ever have to, here are some things to know. It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with CAUTION: the parking brake ﬁrmly set.
Page 138: Mirrors
Mirrors To adjust between Fahrenheit and Celsius do the following: 1. Press and hold the on/off button for approximately Automatic Dimming Rearview Mirror four seconds until either a ﬂashing F or C appears. ® with OnStar , Compass and 2. Press the button again to change the display to the desired unit of measurement.
Page 139: Compass Variance
Compass Variance The mirror is set in zone eight upon leaving the factory. It will be necessary to adjust the compass to compensate for compass variance if you live outside of zone eight. Under certain circumstances, as during a long distance cross-country trip, it will be necessary to adjust for compass variance.
Page 140: Compass Calibration
Compass Calibration Outside Power Foldaway Mirrors The compass may need calibration if one of the The outside power following occurs: foldaway mirror controls • After approximately ﬁve seconds, the display does are located on the driver’s not show a compass heading (N for North, for door armrest.
Page 141: Curb View Assist
Curb View Assist If the mirrors are accidentally folded/unfolded manually, they may shake or ﬂutter at normal driving speeds If your vehicle has the memory package, the outside and may not stay in the unfolded position. If this mirrors are able to perform the park tilt function. This happens, you will need to reset the mirrors.
Page 142: Object Detection Systems
Convex Mirror Object Detection Systems Ultrasonic Rear Parking CAUTION: Assist (URPA) A convex mirror can make things (like other If your vehicle has the Ultrasonic Rear Parking Assist vehicles) look farther away than they really are. (URPA) system, it helps you park easier and avoid other vehicles while in REVERSE (R).
Page 143: How The System Works
On some vehicles this display is located near the CAUTION: passenger side rear window and can be seen by looking over your The Ultrasonic Rear Parking Assist (URPA) right shoulder. system does not replace driver vision. It cannot detect: • objects that are below the bumper, underneath the vehicle, or if they are too close or far from the vehicle...
Page 144 To be detected, objects must be at least 10 inches The system can be (25.4 cm) off the ground and below liftgate level. Objects disabled by pressing the must also be within 8 feet (2.5 m) from your rear rear park aid disable button bumper.
Page 145: Onstar System
• If you lock your keys in the vehicle, call OnStar at A tow bar is attached to your vehicle. 1-888-4-ONSTAR and they can send a signal to unlock • The vehicle’s bumper is damaged. Take the vehicle your doors. If you need roadside assistance, press to your dealer/retailer to repair the system.
Page 146: Onstar Services
OnStar Services • ® GM Goodwrench On Demand Diagnostics • OnStar Hands-Free Calling with 30 complimentary For new vehicles with OnStar, the Safe & Sound Plan, minutes or the Directions & Connections Plan is included for one year from the date of purchase. You can extend this •...
Page 147: Onstar Virtual Advisor
OnStar Virtual Advisor How OnStar Service Works OnStar Virtual Advisor is a feature of OnStar Your vehicle’s OnStar system has the capability of Hands-Free Calling that uses your minutes to access recording and transmitting vehicle information. This location-based weather, local traffic reports, and information is automatically sent to an OnStar Call stock quotes.
Page 148: Universal Home Remote System
Universal Home Remote Location information about your vehicle is only available if the GPS satellite signals are unobstructed and System available. Your vehicle must have a working electrical system (including adequate battery power) for the OnStar Universal Home Remote System equipment to operate.
Page 149: Universal Home Remote System Operation
Universal Home Remote System Be sure to keep the original remote control transmitter for use in other vehicles, as well as, for future Operation (With Three Round LED) programming. You only need the original remote control transmitter for Fixed Code programming. It is also recommended that upon the sale or lease termination of the vehicle, the programmed buttons should be erased for security purposes.
Page 150 To program up to three devices: 1. From inside the vehicle, press the two outside buttons at the same time for one to two seconds, and immediately release them. 2. Locate in the garage, the garage door opener receiver (motor-head unit). Locate the “Learn” or “Smart”...
Page 151 Programming Universal Home 3. Immediately return to your vehicle. Press and hold the Universal Home Remote button that you would Remote — Fixed Code like to use to control the garage door until the garage door moves. The indicator light, above the If you have questions or need help programming the selected button, should slowly blink.
Page 152 To program up to three devices: Your hand held transmitter may have between eight to 12 dip switches depending on the brand of transmitter. Your garage door opener receiver (motor head unit) may also have a row of dip switches that can be used when programming the Universal Home Remote.
Page 153 Example of Eight Dip Switches with Two Positions Example of Eight Dip Switches with Three Positions Your panel of switches may not appear exactly as they do in the examples, but they should be similar. The switch positions on your hand-held transmitter may be labeled as follows: •...
Page 154 2. Write down the eight to 12 switch settings from left to right as follows: • When a switch is in the up position, write “Left.” • When a switch is in the down position, write “Right.” • If a switch is set between the up and down position, write “Middle.”...
Page 155 Reprogramming Universal Home 5. After entering all of the switch positions, again, ﬁrmly press and release all three buttons at the Remote Buttons same time. The indicator lights will turn on. You can reprogram any of the three buttons by repeating 6.
Page 156: Storage Areas
Storage Areas Glove Box To open, lift the handle up. Use the key to lock and unlock. Cupholder(s) Your vehicle may have cupholders located in the front and rear of the ﬂoor console or in the fold down armrest. You may also have cupholders in the second and third row seat armrest areas.
Page 157: Instrument Panel Storage
Instrument Panel Storage Luggage Carrier Your vehicle may have a closed storage area on the You can load things on top of your vehicle with this instrument panel above the compact disc changer. You feature. can open the storage area by pressing in the bottom The luggage carrier has slats and siderails attached to of the lid and the lid will automatically raise up.
Page 158: Rear Storage Area
• Be sure the cargo is properly loaded. For the purpose of wind noise reduction, locate the front crossrail approximately 18 to 24 inches • If small heavy objects are placed on the roof, place (46 to 58 cm) rearward of the front supports. the load in the area over the rear wheels (behind the rear side door on Yukon XL Denali models).
Page 159: Cargo Cover
Cargo Cover To remove the cover, from a regular wheelbase model, do the following: 1. Let the cover go all the way into the holder. CAUTION: 2. Then, grasping the driver’s side cover end cap, push the cover end cap toward the passenger’s side of the vehicle.
Page 160: Sunroof
Cargo Tie Downs Manual-Open/Manual-Close: To open the sunroof press and hold the rear of the driver’s side switch until Your vehicle may have cargo tie downs in the rear the sunroof reaches the desired position. To close cargo area that allow you to strap cargo in and keep it the sunroof, press and hold the front of the driver’s side from moving inside the vehicle.
Page 161 Express-Open/Express-Close: To express-open the Vent: The sunroof has an express-vent open feature. sunroof, fully press and release the rear of the From the closed position, press the rear of the driver’s side switch. The sunroof will open automatically. passenger’s side switch to vent the sunroof. To stop the To stop the sunroof partway, press the switch a sunroof partway, press the switch a second time.
Page 162 NOTES 2-64...
Page 163: Instrument Panel
Section 3 Instrument Panel Instrument Panel Overview .......3-4 Front Reading Lamps ........3-20 Hazard Warning Flashers ........3-6 Electric Power Management ......3-20 Other Warning Devices ........3-6 Battery Run-Down Protection ......3-21 Horn .............3-6 Accessory Power Outlet(s) ......3-21 Tilt Wheel .............3-7 Ashtray(s) and Cigarette Lighter ......3-22 Heated Steering Wheel ........3-7 Climate Controls ..........3-23 Turn Signal/Multifunction Lever ......3-8...
Page 164 Section 3 Instrument Panel Engine Coolant Temperature Gage ....3-41 DIC Warnings and Messages ......3-56 Tire Pressure Light ........3-41 DIC Vehicle Customization (With DIC Buttons) ..3-64 Malfunction Indicator Lamp ......3-42 Audio System(s) ..........3-73 Oil Pressure Gage ........3-45 Setting the Clock ..........3-74 Oil Pressure Light .........3-46 Radio(s) (MP3) ..........3-76 Security Light ..........3-46...
Page 165 NOTES...
Page 166: Instrument Panel Overview
Instrument Panel Overview United States version shown; Canada Similar...
Page 167 A. Air Outlets. See Outlet Adjustment on page 3-29. J. Cruise Control Buttons. See Cruise Control on page 3-13. Heated Steering Wheel Button (If B. Turn Signal/Multifunction Lever. See Turn Equipped). See Heated Steering Wheel on page 3-7. Signal/Multifunction Lever on page 3-8. K.
Page 168: Hazard Warning Flashers
Hazard Warning Flashers Other Warning Devices The hazard warning ﬂashers warn others. They also let If you carry reﬂective triangles, you can set them up at police know you have a problem. the side of the road about 300 feet (100 m) behind your vehicle.
Page 169: Tilt Wheel
Tilt Wheel Heated Steering Wheel Your vehicle has a tilt wheel, that lets you adjust the Your vehicle may have a heated steering wheel. steering wheel before driving. Raising it to the highest The button with this level gives more room to exit and enter your vehicle. symbol is located on the left side of the steering wheel.
Page 170: Turn Signal/Multifunction Lever
Turn Signal/Multifunction Lever (Windshield Washer): See Windshield Washer on page 3-11. (Rear Wiper Delay): See Rear Window Wiper/Washer on page 3-12. (Rear Wiper): See Rear Window Wiper/Washer on page 3-12. (Rear Wiper Wash): See Rear Window Wiper/Washer on page 3-12. Turn and Lane-Change Signals The lever on the left side of the steering column The turn signal has two upward (for right) and two...
Page 171: Headlamp High/Low-Beam Changer
Headlamp High/Low-Beam Changer An arrow on the instrument panel cluster will ﬂash in the direction of the (Headlamp High/Low Beam Changer): To turn or lane change. change the headlamps from low to high beam, push the lever toward the instrument panel. To return to low-beam headlamps, pull the multifunction lever toward you.
Page 172: Windshield Wipers
If your headlamps are in the automatic position or on (Mist): Turn the band to mist for a single wiping low beam, your high-beam headlamps will turn on. They cycle. Hold it there until the wipers start. Then let will stay on as long as you hold the lever toward you. go.
Page 173: Windshield Washer
Windshield Washer To turn on the Rainsense™ feature, the wipers must be set to one of the ﬁve delay settings. Each of the ﬁve settings adjusts the sensitivity of the rain sensor. Since different drivers have different setting preferences, CAUTION: it is recommended that the mid-range setting, position three, be used initially.
Page 174: Rear Window Wiper/Washer
Heated Windshield Washer Rear Window Wiper/Washer For vehicles with the heated windshield washer ﬂuid system it can be used to help clear ice, snow, tree sap, CAUTION: or bugs from your windshield. The button is located in In freezing weather, do not use your washer the switchbank under the until the windshield is warmed.
Page 175: Cruise Control
With cruise control, a speed of about 25 mph (40 km/h) (Rear Wiper Wash): To turn on the rear wiper or more can be maintained without keeping your foot wash, push the button on the end of the turn on the accelerator. This can really help on long signal/multifunction lever to spray washer ﬂuid on the trips.
Page 176 Setting Cruise Control The cruise control buttons are located on left side of Cruise control will not work if your parking brake is set, the steering wheel. or if the master cylinder brake ﬂuid level is low. The cruise control light on the instrument panel cluster comes on after the cruise control has been set to the desired speed.
Page 177 Resuming a Set Speed Reducing Speed While Using Cruise Control Suppose you set your cruise control at a desired speed and then you apply the brake. This shuts off the To reduce your speed while using cruise control: cruise control. But you do not need to reset it. •...
Page 178: Exterior Lamps
Ending Cruise Control It controls the following systems: • Headlamps There are three ways to end cruise control: • • Taillamps Step lightly on the brake pedal. • • Parking Lamps Press the cancel button on the steering wheel. • •...
Page 179: Headlamps On Reminder
Headlamps on Reminder (Parking Lamps): Turn the control to this position to turn on the parking lamps together with the A reminder chime will sound when the headlamps or following: parking lamps are manually turned on and your ignition • Instrument Panel Lights is off and a door is open.
Page 180: Automatic Headlamp System
When it begins to get dark, the automatic headlamp There is a delay in the transition between the daytime system will switch from DRL to the headlamps. and nighttime operation of the Daytime Running Lamps (DRL) and the automatic headlamp systems so To turn off the DRL lamps, turn the exterior lamps that driving under bridges or bright overhead street control to the OFF position and then release.
Page 181: Fog Lamps
Fog Lamps Instrument Panel Brightness (Fog Lamps): If your vehicle has fog lamps, the (Instrument Panel Brightness): This feature control is located next to the exterior lamps control controls the brightness of the instrument panel lights and on the instrument panel to the left of the steering is located next to the exterior lamp control.
Page 182: Dome Lamp Override
Dome Lamp Override Front Reading Lamps The dome lamp override button is located next to the The reading lamps are located on the overhead console. exterior lamps control. To turn the reading lamps on or off, press the button located next to each lamp. (Dome Off): Press the button in and the dome The lamps can be adjusted to a desired direction.
Page 183: Battery Run-Down Protection
Battery Run-Down Protection The battery can be discharged at idle if the electrical loads are very high. This is true for all vehicles. This is because the generator (alternator) may not be This feature shuts off the dome, and reading lamps spinning fast enough at idle to produce all the power if they are left on for more than 10 minutes when that is needed for very high electrical loads.
Page 184: Ashtray(S) And Cigarette Lighter
The accessory power outlets are powered, even with Notice: Improper use of the power outlet can cause the ignition off. Continuing to use accessory power damage not covered by your warranty. Do not outlets while the ignition is in LOCK/OFF may cause the hang any type of accessory or accessory bracket vehicle’s battery to run down.
Page 185: Climate Controls
Climate Controls Driver’s Side Temperature Control The driver’s side temperature buttons are used to adjust the temperature of the air coming through the system on Dual Automatic Climate Control the driver’s side. The temperature can be adjusted even if System the system is turned off.
Page 186: Automatic Operation
The passenger’s temperature setting can be set to match If it is hot outside, the air inlet may automatically the driver’s temperature setting by pressing the PASS switch to recirculate inside air to help quickly button and turning off the PASS indicator. When the cool down the vehicle.
Page 187 yN z (On/Off): Press this button to turn off the climate (Mode): Press the mode up and down control system. Outside air will still enter the vehicle, and buttons to manually change the direction of the airﬂow will be directed to the ﬂoor. This direction can be in the vehicle.
Page 188: Air Conditioning
Air Conditioning (Defog): See “Defogging and Defrosting” later in this section. (Air Conditioning): Press this button to turn the (Recirculation): Press this button to turn the air conditioning (A/C) compressor on and off. When recirculation mode on. When the button is pressed, an air conditioning is selected, an indicator light comes on indicator light comes on.
Page 189 Sensors The interior temperature sensors located in the headliner above the driver side seat and if equipped, in the headliner above the second row seats measure the temperature of the air inside the vehicle. There is also an exterior temperature sensor located behind the front grille.
Page 190: Defogging And Defrosting
Defogging and Defrosting Rear Window Defogger Fog on the inside of the windows is a result of high The rear window defogger uses a warming grid to humidity (moisture) condensing on the cool window remove fog from the rear window. glass.
Page 191: Outlet Adjustment
Outlet Adjustment Rear Air Conditioning and Heating System and Electronic Climate Use the air outlets located in the center and on the side of the instrument panel to direct the airﬂow. Controls Operation Tips For vehicles with the rear heat and air conditioning •...
Page 192 To turn the system on from the rear, press any rear +/− (Increase/Decrease Temperature): Press the + or − buttons to increase or decrease the cabin temperature. climate control button, except the button. To turn the The rear control temperature display will show the system off, press and hold the button.
Page 193: Warning Lights, Gages, And Indicators
Warning Lights, Gages, and Gages can indicate when there may be or is a problem with one of your vehicle’s functions. Often gages Indicators and warning lights work together to let you know when there is a problem with your vehicle. This part describes the warning lights and gages on When one of the warning lights comes on and stays on your vehicle.
Page 194: Instrument Panel Cluster
Instrument Panel Cluster United States version shown, Canada similar The instrument cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, about how much fuel you have and many other things you will need to know to drive safely and economically.
Page 195: Speedometer And Odometer
Speedometer and Odometer Tachometer The speedometer lets you see your speed in both miles Your tachometer displays the engine speed in per hour (mph) and kilometers per hour (km/h). revolutions per minute (rpm). The odometer mileage can be checked without the Safety Belt Reminders vehicle running.
Page 196: Passenger Safety Belt Reminder Light
Passenger Safety Belt Reminder Light Airbag Readiness Light Several seconds after the engine is started, a chime There is an airbag readiness light on the instrument will sound for several seconds to remind the front panel cluster, which shows the airbag symbol. The passenger to buckle their safety belt.
Page 197: Passenger Airbag Status Indicator
Passenger Airbag Status Indicator CAUTION: Your vehicle has the passenger sensing system. Your overhead console has a passenger airbag status indicator. If the airbag readiness light stays on after you start your vehicle, it means the airbag system may not be working properly. The airbags in your vehicle may not inﬂate in a crash, or they could even inﬂate without a crash.
Page 198 If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the right front CAUTION: passenger’s frontal airbag is enabled (may inﬂate). Even though the passenger sensing system is CAUTION: designed to turn off the right front passenger’s frontal airbag if the system detects a rear-facing child restraint, no system is fail-safe, and no If the on indicator comes on when you have a...
Page 199: Charging System Light
Charging System Light If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing This light will come on system. See your dealer/retailer for service. brieﬂy when you turn on the ignition, but the engine is not running, as a...
Page 200: Voltmeter Gage
Voltmeter Gage Readings in the low warning zone may occur when a large number of electrical accessories are operating in the vehicle and the engine is left at an idle for an When your engine is not extended period. This condition is normal since the running, but the ignition is charging system is not able to provide full power on, this gage shows...
Page 201: Brake System Warning Light
Brake System Warning Light This light should come on brieﬂy when you turn the ignition key to RUN. If it does not come on then, have it ﬁxed so it will be ready to warn you if there is a problem. With the ignition on, the brake system warning light will come on when you set the parking brake.
Page 202: Antilock Brake System Warning Light
® Antilock Brake System StabiliTrak Indicator Light Warning Light For vehicles that have the ® StabiliTrak system, this For vehicles with the warning light should Antilock Brake System come on brieﬂy when the (ABS), this light will come engine is started. on brieﬂy when you start the engine.
Page 203: Engine Coolant Temperature Gage
Engine Coolant Temperature Gage Tire Pressure Light This light comes on brieﬂy when the engine is started. United States Canada This light will also come on when one or more of your This gage shows the engine coolant temperature. tires are signiﬁcantly underinﬂated. It also provides an indicator of how hard your vehicle is A tire pressure message in the Driver Information working.
Page 204: Malfunction Indicator Lamp
Malfunction Indicator Lamp Notice: Modiﬁcations made to the engine, transmission, exhaust, intake, or fuel system of your vehicle or the replacement of the original tires Check Engine Light with other than those of the same Tire Performance Criteria (TPC) can affect your vehicle’s emission A computer system called OBD II (On-Board controls and can cause this light to come on.
Page 205: If The Light Is Flashing
If the Light is Flashing If the Light Is On Steady The following can prevent more serious damage to your You might be able to correct the emission system vehicle: malfunction by considering the following: • Reduce vehicle speed. Did you recently put fuel into your vehicle? •...
Page 206: Emissions Inspection And Maintenance Programs
If you experience one or more of these conditions, Your vehicle will not pass this inspection if the OBD change the fuel brand you use. It will require at least (on-board diagnostic) system determines that critical one full tank of the proper fuel to turn the light off. emission control systems have not been completely diagnosed by the system.
Page 207: Oil Pressure Gage
Oil Pressure Gage Oil pressure may vary with engine speed, outside temperature and oil viscosity, but readings above the low pressure zone indicate the normal operating range. When the oil pressure reaches the low pressure zone, the “OIL PRESSURE LOW STOP ENGINE” message will appear in the Driver Information Center.
Page 208: Oil Pressure Light
Oil Pressure Light This light will come on brieﬂy when you start your engine. If it does not, have your vehicle serviced. CAUTION: Do not keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches ﬁre.
Page 209: Fog Lamp Light
Fog Lamp Light Highbeam On Light The fog lamp light will This light comes on when come on when the fog the high-beam headlamps lamps are in use. are in use. The light will go out when the fog lamps are turned off. See Headlamp High/Low-Beam Changer on page 3-9 See Fog Lamps on page 3-19 for more information.
Page 210: Fuel Gage
Fuel Gage Here are some situations you may experience with your fuel gage. None of these indicate a problem with the fuel gage. • At the gas station, the fuel pump shuts off before the gage reads full. • It takes a little more or less fuel to ﬁll up than the fuel gage indicated.
Page 211: Driver Information Center (Dic)
DIC Operation and Displays This light and a chime will come on when the fuel tank is low on fuel. There will also be a “FUEL LEVEL LOW” (Using DIC Buttons) message on the Driver Information Center, see DIC Warnings and Messages on page 3-56 for more The DIC has different displays which can be accessed information.
Page 212 DIC Buttons (Customization): Press this button to customize the feature settings on your vehicle. See DIC Vehicle The buttons are the Customization (With DIC Buttons) on page 3-64 for more trip/fuel, vehicle information. information, customization, and set/reset buttons. (Set/Reset): Press this button to set or reset certain The button functions are functions and to turn off or acknowledge messages detailed in the following...
Page 213 Trip Odometer Fuel Range Press the trip/fuel button until TRIP displays. This Press the trip/fuel button until FUEL RANGE displays. display shows the current distance traveled in either This display shows the approximate number of miles (mi) or kilometers (km) since the last reset for the remaining miles (mi) or kilometers (km) the vehicle can trip odometer.
Page 214 Fuel Used Transmission Temperature Press the trip/fuel button until FUEL USED displays. Press the trip/fuel button until TRANS TEMP displays. This display shows the number of gallons (gal) or This display shows the temperature of the automatic liters (L) of fuel used since the last reset of this menu transmission ﬂuid in either degrees Fahrenheit (°F) or item.
Page 215: Tire Pressure
Tire Pressure When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The pressure for each tire can be viewed in the DIC. See “CHANGE ENGINE OIL SOON” under DIC The tire pressure will be shown in either pounds Warnings and Messages on page 3-56.
Page 216: Dic Operation And Displays
Relearn Remote Key DIC Operation and Displays (Using Trip Odometer Reset Stem) This display allows you to match Remote Keyless Entry (RKE) transmitters to your vehicle. To match an RKE transmitter to your vehicle: The DIC has different displays which can be accessed by pressing the trip odometer reset stem located on 1.
Page 217 Trip Odometer Language Press the trip odometer reset stem until TRIP displays. This display allows you to select the language in which This display shows the current distance traveled in the DIC messages will appear. To select a language: either miles (mi) or kilometers (km) since the last reset 1.
Page 218: Dic Warnings And Messages
DIC Warnings and Messages CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be Messages are displayed on the DIC to notify the driver changed. When you change the engine oil, be sure that the status of the vehicle has changed and that to reset the CHANGE ENGINE OIL SOON message.
Page 219 DRIVER DOOR OPEN ENGINE OVERHEATED IDLE ENGINE This message displays and a chime sounds if the driver Notice: If you drive your vehicle while the engine is door is not fully closed and the vehicle is in a drive overheating, severe engine damage may occur. If gear.
Page 220: Engine Overheated Stop Engine
ENGINE OVERHEATED STOP ENGINE The vehicle may be driven at a reduced speed while this message is on, but acceleration and speed may be Notice: If you drive your vehicle while the engine reduced. Anytime this message stays on, the vehicle is overheating, severe engine damage may occur.
Page 221: Oil Pressure Low Stop Engine
OIL PRESSURE LOW STOP ENGINE PASSENGER DOOR OPEN This message displays and a chime sounds if the Notice: If you drive your vehicle while the engine passenger door is not fully closed and the vehicle is in a oil pressure is low, severe engine damage may drive gear.
Page 222: Service Brake System
REPLACE BATTERY IN REMOTE KEY SERVICE BATTERY CHARGING SYSTEM This message displays if a Remote Keyless Entry (RKE) transmitter battery is low. The battery needs to be On some vehicles, this message displays if there is a replaced in the transmitter. See “Battery Replacement” problem with the battery charging system.
Page 223: Service Suspension System
SERVICE BRAKES SOON SERVICE SUSPENSION SYSTEM ® This message displays if there is a problem with the If your vehicle has the Autoride suspension system, ® brake system. If this message appears, stop as soon as this message displays when the Autoride suspension possible and turn off the vehicle.
Page 224 SERVICE TRACTION CONTROL There are several conditions that can cause this message to appear. ® If your vehicle has StabiliTrak , this message displays • One condition is overheating, which could occur if when there is a problem with the Traction Control ®...
Page 225: Turn Signal On
TIGHTEN GAS CAP TRANSMISSION HOT IDLE ENGINE This message may display along with the check engine Notice: If you drive your vehicle while the light on the instrument panel cluster if the vehicle’s transmission ﬂuid is overheating and the fuel cap is not tightened properly. See Malfunction transmission temperature warning is displayed on Indicator Lamp on page 3-42.
Page 226: Dic Vehicle Customization (With Dic Buttons)
WASHER FLUID LOW ADD FLUID Entering the Feature Settings Menu 1. Turn the ignition on and place the vehicle in This message displays when the windshield washer PARK (P). ﬂuid is low. Fill the windshield washer ﬂuid reservoir as soon as possible. See Engine Compartment Overview To avoid excessive drain on the battery, it is on page 5-12 for the location of the windshield recommended that the headlamps are turned off.
Page 227 DISPLAY LANGUAGE AUTO DOOR LOCK This feature allows you to select the language in which This feature allows you to select when the vehicle’s the DIC messages will appear. doors will automatically lock. See Programmable Automatic Door Locks on page 2-11 for more Press the customization button until the DISPLAY information.
Page 228: Remote Door Lock
AUTO DOOR UNLOCK REMOTE DOOR LOCK This feature allows you to select whether or not to turn This feature allows you to select the type of feedback off the automatic door unlocking feature. It also you will receive when locking the vehicle with the allows you to select which doors and when the doors Remote Keyless Entry (RKE) transmitter.
Page 229: Remote Door Unlock
DELAY DOOR LOCK NO CHANGE: No change will be made to this feature. The current setting will remain. This feature allows you to select whether or not the To select a setting, press the set/reset button while the locking of the vehicle’s doors and liftgate will be delayed. desired setting is displayed on the DIC.
Page 230: Approach Lighting
EXIT LIGHTING APPROACH LIGHTING This feature allows you to select the amount of time you This feature allows you to select whether or not to have want the exterior lamps to remain on when it is dark the exterior lights turn on brieﬂy during low light enough outside.
Page 231: Park Tilt Mirrors
CHIME VOLUME Press the customization button until PARK TILT MIRRORS appears on the DIC display. Press the This feature allows you to select the volume level of set/reset button once to access the settings for the chime. this feature. Then press the customization button to scroll through the following settings: Press the customization button until CHIME VOLUME appears on the DIC display.
Page 232 EASY EXIT SEAT NO CHANGE: No change will be made to this feature. The current setting will remain. If your vehicle has this feature, it allows you to select To select a setting, press the set/reset button while the your preference for the automatic easy exit seat feature. desired setting is displayed on the DIC.
Page 233: Remote Start
REMOTE START ON: The driver’s seat and, on some vehicles, the outside mirrors will automatically move to the stored If your vehicle has this feature, it allows you to turn the driving position when the unlock button on the Remote remote start off or on.
Page 234: Factory Settings
EXIT FEATURE SETTINGS NO CHANGE: No change will be made to this feature. The current setting will remain. This feature allows you to exit the feature settings menu. To select a setting, press the set/reset button while the Press the customization button until PRESS TO EXIT desired setting is displayed on the DIC.
Page 235: Audio System(S)
Audio System(s) While your vehicle is parked: • Familiarize yourself with all of its controls. Determine which radio your vehicle has and then read • Familiarize yourself with its operation. the pages following to familiarize yourself with its features. • Set up your audio system by presetting your favorite radio stations, setting the tone, and adjusting the speakers.
Page 236: Setting The Clock
Setting the Clock Changing the Time and Date Default Settings MP3 Radio with a Single CD and DVD You can change the time default setting from 12 hours Player to 24 hours or change the date default setting from month/day/year to day/month/year. If your vehicle has a radio with a single CD and DVD To change the time or date default settings, follow these player, it has a...
Page 237 MP3 Radio with a Six-Disc CD Player Changing the Time and Date Default Settings If your vehicle has a radio with a six-disc CD player, it You can change the time default setting from 12 hours has a MENU button instead of the button to set to 24 hours or change the date default setting from the time and date.
Page 238: Radio(S) (Mp3)
Radio(s) (MP3) Radio with CD and DVD Radio with Six-Disc CD Your vehicle has one of these radios as its audio system. 3-76...
Page 239: Playing The Radio
Radios with CD and DVD While the radio is tuned to an FM-RDS station, the station name or call letters displays. In rare cases, a ® Radios with CD and DVD have a Bose Surround radio station could broadcast incorrect information Sound System.
Page 240: Finding A Station
To activate: (Information) (XM™ Satellite Radio Service, MP3, and RDS Features): Press to display additional text 1. Set the radio volume to the desired level. information related to the current FM-RDS or XM™ 2. Press the MENU button to display the radio station, or MP3 song.
Page 241 Setting the Tone To store a station as a favorite, perform the following steps: (Bass/Midrange/Treble) 1. Tune to the desired radio station. BASS/MID/TREB (Bass, Midrange, or Treble): To 2. Press the FAV button to display the page where adjust bass, midrange, or treble, press the knob until you want the station stored.
Page 242 Adjusting the Speakers (Balance/Fade) EQ (Equalization): Press to change Digital Signal ® Processing (DSP) settings (Bose audio systems only). DSP settings provide a choice of different listening BAL/FADE (Balance/Fade): To adjust balance or experiences. fade, press the knob until the speaker control labels display.
Page 243 Finding a Category (CAT) Station Undesired XM™ categories can be removed through the setup menu. To remove an undesired category, perform the following: CAT (Category): The CAT button is used to ﬁnd XM™ stations when the radio is in the XM™ mode. To ﬁnd 1.
Page 244: Radio Messages
Radio Messages Radio Messages for XM™ Only See XM Radio Messages on page 3-104 later in this Calibration Error: The audio system has been section for further detail. calibrated for your vehicle from the factory. If Calibration Error displays, it means that the radio has not been Playing a CD(s) conﬁgured properly for your vehicle and it must be returned to your dealer/retailer for service.
Page 245 If the ignition or radio is turned off with a CD in the When a CD is inserted, the text label DVD or CD symbol player it stays in the player. When the ignition or radio displays on the left side of the radio display. As each new is turned on, the CD starts to play where it stopped, if it track starts to play, the track number displays.
Page 246 Care of Your CD and DVD Player For the Six-Disc CD player, press and hold for two seconds to eject all discs. Do not add any label to a CD, it could get caught in the CD or DVD player. If a CD is recorded on a personal DVD (Eject): Press and release to eject the disc computer and a description label is needed, try labeling that is currently playing in the top slot.
Page 247 To play the tracks from a CD loaded in the radio REV (Reverse): Press and hold to reverse with CD and DVD, press the DVD/CD AUX playback quickly within a track. You will hear sound at a button when not sourced to the CD, or insert a disc reduced volume.
Page 248 Radios with CD and DVD Audio Output DVD/CD AUX (Auxiliary): Press to cycle through DVD, CD, or Auxiliary when listening to the radio. The Only one audio source can be heard through the DVD/CD text label and a message showing the track or speakers at one time.
Page 249 Playing an MP3 CD-R or CD-RW Disc Player Error: There are disc LOAD or disc EJECT problems. Radios with a Six-Disc CD player have the capability of • It is very hot. When the temperature returns to playing an MP3 CD-R or CD-RW disc. For more normal, the CD should play.
Page 250: Playing A Dvd
Using the DVD Player Playing a DVD The DVD player is controlled by the buttons on the DVD/CD AUX (Auxiliary): Press to cycle through DVD, remote control, or by the RSA system, or by the buttons CD, or Auxiliary when listening to the radio. The on the radio faceplate.
Page 251 ¨ (Power): Press to turn the radio on or off. Turn SEEK (Next Track/Chapter): Press the right arrow clockwise or counterclockwise to increase or decrease to go to the next track or chapter. This button might the volume. Press and hold for more than two seconds not work when the DVD is playing the copyright to turn off the entire radio and Rear Seat Entertainment information or the previews.
Page 252 DVD-V (Video) Display Buttons Some DVDs begin playing after the previews have ﬁnished, although there could be a delay of up to Once a DVD-V is inserted, the radio display menu 30 seconds. If the DVD does not begin playing the shows several tag options for DVD playing.
Page 253 DVD-A (Audio) Display Buttons Nav (Navigate): Press to display directional arrows for navigating through the menus. Once a DVD-A is inserted, radio display menu shows several tag options for DVD playing. Press the (Audio Stream): Press to cycle through audio pushbuttons located under any desired tag option stream formats located on the DVD-A disc.
Page 254: Dvd Radio Error Messages
Stopping and Resuming Playback In case loading and reading of a DVD or CD cannot be completed (unknown format, etc.), and the disc fails To stop playing a DVD without turning off the system, to eject, press and hold the DVD button more than press the button on the remote control, or press the...
Page 255 Drivers are encouraged to set up any auxiliary device CD/AUX (CD/Auxiliary): Press to play a CD when a while the vehicle is in PARK (P). See Defensive Driving portable audio device is playing. Press again and on page 4-2 for more information on driver distraction. the system begins playing audio from the connected portable audio player.
Page 256: Using An Mp3
Using an MP3 (Radio with Six-Disc MP3 Format Player) If you burn your own MP3 disc on a personal computer: • Make sure the MP3 ﬁles are recorded on a CD-R MP3 CD-R or CD-RW Disc or CD-RW disc. • Do not mix standard audio and MP3 ﬁles on The radio plays MP3 ﬁles that were recorded on a CD-R or CD-RW disc.
Page 257 • Root Directory Minimize the length of the ﬁle, folder, or playlist names. Long ﬁle, folder, or playlist names, or a The root directory of the CD-R or CD-RW is treated as a combination of a large number of ﬁles and folders, folder.
Page 258 No Folder When play enters a new folder, the display does not automatically show the new folder name unless When the CD contains only compressed ﬁles, the ﬁles you have chosen the folder mode as the default display. are located under the root folder. The (previous) The new track name displays.
Page 259 Playing an MP3 (Tune): Turn this knob to select MP3 ﬁles on the CD-R or CD-RW currently playing. Wait for the message to insert a disc, label side up. The player pulls it in, and the CD-R or CD-RW should ©...
Page 260 FWD (Fast Forward): Press and hold this button (Music Navigator): Use the music navigator to advance playback quickly within an MP3 ﬁle. feature to play MP3 ﬁles on the CD-R or CD-RW in order Sound is heard at a reduced volume. Release this by artist or album.
Page 261 Using an MP3 (Radio with CD and To change from playback by artist to playback by album, press the pushbutton located below the Sort By label. DVD Player) From the sort screen, push one of the buttons below the album button. Press the pushbutton below the back label MP3/WMA CD-R or CD-RW Disc to return to the main music navigator screen.
Page 262 • Root Directory Create a folder structure that makes it easy to ﬁnd songs while driving. Organize songs by albums The root directory of the CD-R or CD-RW is treated as a using one folder for each album. Each folder folder.
Page 263 Order of Play Preprogrammed Playlists Tracks recorded to the CD-R or CD-RW are played in Preprogrammed playlists that were created using the following order: WinAmp™, MusicMatch™, or Real Jukebox™ software can be accessed, however, they cannot be edited • Play begins from the ﬁrst track in the ﬁrst playlist using the radio.
Page 264 As each new track starts to play, the track number and (Tune): Turn this knob to select MP3/WMA ﬁles on song title displays. the CD-R or CD-RW that is currently playing. CD (Eject): Press and release this button to eject ©...
Page 265 The radio can begin playing while it is scanning the disc FWD (Fast Forward): Press and hold this button in the background. When the scan is ﬁnished, the to advance playback quickly within an MP3/WMA CD-R or CD-RW begins playing again. ﬁle.
Page 266: Xm Radio Messages
XM Radio Messages BAND: Press this button to listen to the radio when a CD or a DVD is playing. The CD or DVD remains inside the radio for future listening or viewing entertainment. XL (Explicit Language Channels): These channels, or any others, can be blocked at a customer’s request, DVD/CD AUX (Auxiliary): Press this button to by calling 1-800-852-XMXM (9696).
Page 267: Navigation/Radio System
No Artist Info: No artist information is available at this Check XM Receivr: If this message does not clear time on this channel. The system is working properly. within a short period of time, the receiver could have a fault. Consult with your dealer/retailer. No Title Info: No song title information is available at this time on this channel.
Page 268: Before You Drive
Before You Drive Parental Control can also be turned off by inserting or ejecting any disc, pressing the play icon on the radio DVD The RSE is designed for rear seat passengers only. display menu, or changing an ignition position. The driver cannot safely view the video screen Headphones while driving and should not try to do so.
Page 269 Push the power button to turn on the headphones. Notice: Do not store the headphones in heat or An indicator light located on the headphones comes on. direct sunlight. This could damage the headphones If the light comes on but, there is intermittent sound and repairs will not be covered by your warranty.
Page 270 Audio/Video (A/V) Jacks To use the auxiliary inputs of the RSE system, connect an external auxiliary device to the color-coded A/V jacks and turn both the auxiliary device and the video screen power on. If the video screen is in the DVD player mode, pressing the AUX (auxiliary) button on the remote control switches the video screen from the DVD player mode to the auxiliary device.
Page 271: Audio Output
Audio Output Video Screen Audio from the DVD player or auxiliary inputs can be The video screen is located in the overhead console. heard through the following possible sources: To use the video screen, do the following: • Wireless Headphones 1.
Page 272: Remote Control
Remote Control Remote Control Buttons To use the remote control, aim it at the transmitter window at the rear of the RSE overhead console and press the desired button. Direct sunlight or very bright light could affect the ability of the RSE transmitter to receive signals from the remote control.
Page 273 (Title): Press this button to return the DVD to the (Stop): Press this button to stop playing, fast main menu of the DVD. This function could vary for reversing, or fast forwarding a DVD. Press this button each disc. twice to return to the beginning of the DVD. (Main Menu): Press this button to access the DVD (Play/Pause): Press this button to start playing a menu.
Page 274 AUX (Auxiliary): Press this button to switch the system (Fast Reverse): Press this button to quickly between the DVD player and an auxiliary source. reverse the DVD or CD. To stop fast reversing a DVD video, press the play/pause button. To stop fast (Camera): Press this button to change camera reversing a DVD audio or CD, release the fast reverse angles on DVDs that have this feature while a DVD is...
Page 275 Battery Replacement Problem Recommended Action The remote control does Check to make sure there To change the remote control batteries, do the following: not work. is no obstruction between 1. Slide the rear cover back on the remote control. the remote control and the transmitter window.
Page 276: Dvd Distortion
Disc Format Error: This message displays, if the disc Problem Recommended Action is inserted with the disc label wrong side up, or if Sometimes the wireless Check for obstructions, the disc is damaged. headphone audio cuts out low batteries, reception or buzzes.
Page 277: Rear Seat Audio (Rsa)
Rear Seat Audio (RSA) This feature allows rear seat passengers to listen to and control any of the music sources: radio, CDs, DVDs, or other auxiliary sources. However, the rear seat passengers can only control the music sources the front seat passengers are not listening to (except on some radios where dual control is allowed).
Page 278: Theft-Deterrent Feature
©¨ PROG (Program): Press this button to go to the next (Seek): When listening to FM, AM, or XM™ preset radio station or channel set on the main © ¨ (if equipped), press the left or right seek arrow to radio.
Page 279: Audio Steering Wheel Controls
Audio Steering Wheel Controls If your vehicle has the navigation system, press and hold this button for longer than one second to initiate voice recognition. See “Voice Recognition” in the Vehicles with audio Navigation System manual for more information. steering wheel controls ®...
Page 280: Radio Reception
Radio Reception FM Stereo FM stereo gives the best sound, but FM signals only Frequency interference and static can occur during reach about 10 to 40 miles (16 to 65 km). Tall buildings normal radio reception if items such as cell phone or hills can interfere with FM signals, causing the chargers, vehicle convenience accessories, and external sound to fade in and out.
Page 281: Rear Side Window Antenna
Rear Side Window Antenna Because this antenna is built into the rear side windows, there is a reduced risk of damage caused by car washes and vandals. Your AM-FM antenna is located in the passenger rear side windows. Make sure the inside surfaces of the rear If you choose to add an aftermarket cellular telephone side windows are not scratched and that the lines on to your vehicle, and the antenna needs to be attached to...
Page 282 NOTES 3-120...
Page 283: Driving Your Vehicle
Section 4 Driving Your Vehicle Your Driving, the Road, and Your Vehicle ..4-2 Before Leaving on a Long Trip .......4-27 Defensive Driving ...........4-2 Highway Hypnosis ........4-27 Drunk Driving ..........4-2 Hill and Mountain Roads ........4-28 Control of a Vehicle ........4-3 Winter Driving ..........4-29 Braking ............4-3 If Your Vehicle is Stuck in Sand, Mud, Ice, Antilock Brake System (ABS) ......4-4...
Page 284: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and Drunk Driving Your Vehicle CAUTION: Defensive Driving Drinking and then driving is very dangerous. Defensive driving means “always expect the Your reﬂexes, perceptions, attentiveness, and unexpected.” The ﬁrst step in driving defensively is to judgment can be affected by even a small wear your safety belt —...
Page 285: Control Of A Vehicle
Control of a Vehicle Police records show that almost 40 percent of all motor vehicle-related deaths involve alcohol. In most cases, these deaths are the result of someone who was The following three systems help to control your vehicle drinking and driving. In recent years, more than while driving —...
Page 286: Antilock Brake System (Abs)
Antilock Brake System (ABS) And, of course, actual stopping distances vary greatly with the surface of the road, whether it is pavement or gravel; the condition of the road, whether it is Your vehicle has the Antilock Brake System (ABS), an wet, dry, or icy;...
Page 287: Using Abs
Using ABS Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam Do not pump the brakes. Just hold the brake pedal on the brakes and continue braking. Here is what down ﬁrmly and let antilock work for you.
Page 288: Stabilitrak System
® StabiliTrak System Then turn the steering wheel clockwise from the nine o’clock position to the three o’clock position. If this clears ® the message(s), your vehicle does not need servicing. Your vehicle may be equipped with the StabiliTrak If this does not clear the message(s), then turn the system which combines antilock brake, traction vehicle off, wait 15 seconds, and then turn it back on and stability control systems and helps the driver...
Page 289 The traction control disable When the traction control system has been turned off, button is located on the you may still hear system noises as a result of the instrument panel below the brake-traction control coming on. climate controls. It is recommended to leave the system on for normal driving conditions, but it may be necessary to turn the system off if your vehicle is stuck in sand, mud, ice or snow, and you want to “rock”...
Page 290: All-Wheel Drive (Awd) System
® The engine speed management will be disabled. In this StabiliTrak may also turn off automatically if it mode, engine power is not reduced automatically and the determines that a problem exists with the system. If the driven wheels can spin more freely. This can cause the problem does not clear itself after restarting the brake-traction control to activate constantly.
Page 291: Steering Tips
Steering Tips What should you do if this ever happens? Ease up on the accelerator pedal, steer the vehicle the way you It is important to take curves at a reasonable speed. want it to go, and slow down. A lot of the “driver lost control” accidents mentioned on Speed limit signs near curves warn that you should the news happen on curves.
Page 292: Steering In Emergencies
Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and ﬁnd a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
Page 293: Off-Road Recovery
Off-Road Recovery Passing You may ﬁnd that your right wheels have dropped off Passing another vehicle on a two-lane road can be the edge of a road onto the shoulder while you are dangerous. To reduce the risk of danger while passing, driving.
Page 294: Loss Of Control
Loss of Control Remember: Any traction control system helps avoid only the acceleration skid. If your traction control system is off, then an acceleration skid is also best handled Let us review what driving experts say about what by easing your foot off the accelerator pedal. happens when the three control systems —...
Page 295: Off-Road Driving
Off-Road Driving Off-road driving can be great fun. But it does have some deﬁnite hazards. The greatest of these is the terrain itself. If your vehicle has 20-inch tire/wheel assemblies, you should not drive off-road unless you are on a level, solid “Off-roading”...
Page 296 Before You Go Off-Roading The following steps must be performed on the bolts and snap features to remove the air dam: There are some things to do before you go out. For 1. Remove the two outboard air dam bolts. example, be sure to have all necessary maintenance 2.
Page 297: Environmental Concerns
Loading Your Vehicle for Off-Road There are some important things to remember about how to load your vehicle. Driving • The heaviest things should be on the load ﬂoor and forward of the rear axle. Put heavier items as far forward as you can.
Page 298: Traveling To Remote Areas
• Getting Familiar with Off-Road Driving Always carry a litter bag — make sure all refuse is removed from any campsite before leaving. It is a good idea to practice in an area that is safe • Take extreme care with open ﬁres where permitted, and close to home before you go into the wilderness.
Page 299: Scanning The Terrain
Surface Obstacles: Unseen or hidden obstacles can be hazardous. A rock, log, hole, rut, or bump can startle CAUTION: you if you are not prepared for them. Often these obstacles are hidden by grass, bushes, snow, or even the rise and fall of the terrain itself. Here are some When you are driving off-road, bouncing and things to consider: quick changes in direction can easily throw...
Page 300 Driving on Off-Road Hills Because you will be on an unpaved surface, it is especially important to avoid sudden acceleration, Off-road driving often takes you up, down, or across a sudden turns, or sudden braking. hill. Driving safely on hills requires good judgment In a way, off-road driving requires a different kind of and an understanding of what your vehicle can and alertness from driving on paved roads and highways.
Page 301: Approaching A Hill
Approaching a Hill Driving Uphill When you approach a hill, you need to decide if it is Once you decide you can safely drive up the hill, you one of those hills that is just too steep to climb, descend, need to take some special steps.
Page 302 • • Attach a ﬂag to the vehicle to make you more As you are backing down the hill, put your left hand visible to approaching traffic on trails or hills. on the steering wheel at the 12 o’clock position. This way, you will be able to tell if the wheels are straight •...
Page 303: Driving Downhill
If, after stalling, you try to back down the hill and decide you just cannot do it, set the parking brake, put the CAUTION: transmission in PARK (P) and turn off the engine. Leave the vehicle and go get some help. Exit on the uphill side and stay clear of the path the vehicle would take if Heavy braking when going down a hill can it rolled downhill.
Page 304: Driving Across An Incline
• Your vehicle is much more likely to stall when going A hill that can be driven straight up or down may uphill. But if it happens when going downhill: be too steep to drive across. When you go straight up or down a hill, the length of the wheel 1.
Page 305: Stalling On An Incline
When driving across an incline that is not too steep, the vehicle can hit some loose gravel and start to slide downhill. If you feel your vehicle starting to slide sideways, turn downhill. This should help straighten out the vehicle and prevent the side slipping. However, a much better way to prevent this is to get out and “walk the course”...
Page 306: Driving In Water
Driving in Mud, Sand, Snow, or Ice CAUTION: When you drive in mud, snow, or sand, the wheels will not get good traction. You cannot accelerate as quickly, turning is more difficult, and you will need longer Driving on frozen lakes, ponds, or rivers can braking distances.
Page 307: Driving At Night
After Off-Road Driving If the water is not too deep, drive slowly through it. At faster speeds, water splashes on the ignition system and Remove any brush or debris that has collected on the your vehicle can stall. Stalling can also occur if you underbody, chassis, or under the hood.
Page 308: Driving In Rain And On Wet Roads
Driving in Rain and on Wet Roads Night driving tips include: • Drive defensively. Rain and wet roads can reduce vehicle traction and affect • Do not drink and drive. your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving •...
Page 309: Other Rainy Weather Tips
Hydroplaning Things to check on your own include: • Windshield Washer Fluid: Reservoir full? Windows Hydroplaning is dangerous. Water can build up under clean — inside and outside? your vehicle’s tires so they actually ride on the • water. This can happen if the road is wet enough and Wiper Blades: In good shape? you are going fast enough.
Page 310: Hill And Mountain Roads
Hill and Mountain Roads CAUTION: Driving on steep hills or through mountains is different than driving on ﬂat or rolling terrain. Tips for driving in these conditions include: Coasting downhill in NEUTRAL (N) or with the • ignition off is dangerous. The brakes will have Keep your vehicle serviced and in good shape.
Page 311: Winter Driving
Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You might want to put winter emergency supplies in your vehicle. Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth, and a couple of reﬂective warning triangles.
Page 312: If You Are Caught In A Blizzard
If You Are Caught in a Blizzard Accelerate gently. Try not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and If you are stopped by heavy snow, you could be in a polish the surface under the tires even more. serious situation.
Page 313 CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle.
Page 314: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow
Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again and CAUTION: repeat this only when you feel really uncomfortable from the cold. But do it as little as possible. Preserve the fuel as long as you can.
Page 315: Recovery Hooks
To prevent transmission wear, wait until the wheels stop spinning before shifting gears. Release the accelerator pedal while you shift, and press lightly on the accelerator pedal when the transmission is in gear. By slowly spinning the wheels in the forward and reverse directions, you will cause a rocking motion that could free your vehicle.
Page 316: Loading Your Vehicle
Loading Your Vehicle Tire and Loading Information Label It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo and all nonfactory-installed options.
Page 317 The Tire and Loading Information label also shows The resulting ﬁgure equals the available the size of the original equipment tires (C) and amount of cargo and luggage load capacity. the recommended cold tire inﬂation pressures (D). For example, if the “XXX” amount equals For more information on tires and inﬂation see 1400 lbs and there will be ﬁve 150 lb Tires on page 5-55 and Inﬂation - Tire Pressure on...
Page 318 Example 1 Example 2 Item Description Total Item Description Total Vehicle Capacity Vehicle Capacity 1,000 lbs 1,000 lbs Weight for Weight for (453 kg) (453 kg) Example 1 = Example 2 = Subtract Occupant Subtract Occupant Weight 150 lbs 300 lbs (136 kg) Weight 150 lbs 750 lbs (136 kg) (68 kg) ×...
Page 319 Refer to your vehicle’s tire and loading information label for speciﬁc information about your vehicle’s capacity weight and seating positions. The combined weight of the driver, passengers and cargo should never exceed your vehicle’s capacity weight. Certiﬁcation/Tire Label Example 3 Item Description Total...
Page 320 This is called Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the CAUTION: vehicle, all occupants, fuel and cargo. The Certiﬁcation/Tire label also tells you the Do not load your vehicle any heavier than maximum weights for the front and rear axles, the Gross Vehicle Weight Rating (GVWR), called Gross Axle Weight Rating (GAWR).
Page 321 If you put things inside your vehicle – like suitcases, tools, packages, or anything else – they go as fast CAUTION: (Continued) as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they’ll keep going. •...
Page 322: Towing
Towing Dinghy Towing and Dolly Towing All-Wheel Drive Vehicles Towing Your Vehicle Notice: Towing an all-wheel-drive vehicle with all four wheels on the ground, or even with only two of Consult your dealer/retailer or a professional towing its wheels on the ground, will damage drivetrain service if you need to have your disabled vehicle towed.
Page 323: Level Control
® Level Control Autoride ® The Autoride feature provides improved vehicle ride Automatic Level Control and handling under a variety of passenger and loading The automatic level control rear suspension is available conditions. on light-duty vehicles and comes as a part of the The system is fully automatic and uses a computer ®...
Page 324: Towing A Trailer
Towing a Trailer Notice: Pulling a trailer improperly can damage your vehicle and result in costly repairs not covered by your warranty. To pull a trailer correctly, follow Do not tow a trailer during break-in. See New Vehicle the advice in this part, and see your dealer for Break-In on page 2-25 for more information.
Page 325: If You Do Decide To Pull A Trailer
If You Do Decide To Pull A Trailer Three important considerations have to do with weight: • the weight of the trailer If you do, here are some important points: • the weight of the trailer tongue • There are many different laws, including speed limit •...
Page 326 Tow/Haul is designed to be most effective when the vehicle and trailer combined weight is at least 75 percent of the vehicle’s Gross Combination Weight Rating (GCWR). See “Weight of the Trailer” later in this section. Tow/Haul is most useful under the following driving conditions: •...
Page 327: Weight Of The Trailer
Weight of the Trailer Maximum trailer weight is calculated assuming only the driver is in the tow vehicle and it has all the required How heavy can a trailer safely be? trailering equipment. The weight of additional optional equipment, passengers and cargo in the tow vehicle It depends on how you plan to use your rig.
Page 328 If you have a lot of options, equipment, passengers or Do not exceed the maximum allowable tongue weight cargo in your vehicle, it will reduce the tongue weight your for your vehicle. Choose the shortest hitch extension vehicle can carry, which will also reduce the trailer weight that will position the hitch ball closest to the vehicle.
Page 329 Consider the following example: But let’s say your speciﬁc vehicle is equipped with some of the latest options and you have a front seat passenger A vehicle model base weight is 5,500 lbs (2 495 kg); and two rear seat passengers with some luggage and 2,800 lbs (1 270 kg) at the front axle and 2,700 lbs gear in the vehicle as well.
Page 330 Hitches The effect of tongue weight is about 1.5 times the actual weight. Dividing the 900 lbs (408 kg) by 1.5 leaves you It’s important to have the correct hitch equipment. with being able to handle only 600 lbs (272 kg) of tongue Crosswinds, large trucks going by and rough roads are weight.
Page 331 If you use a step-bumper hitch, the bumper could be To reinstall the hitch cover: damaged in sharp turns. Make sure there is ample room when turning to avoid contact between the trailer and the bumper. If you will be pulling a trailer that, when loaded, will weigh more than 5,000 lbs (2 270 kg) be sure to use a properly mounted weight-distributing hitch and sway control of the proper size.
Page 332: Safety Chains
Safety Chains Driving with a Trailer You should always attach chains between your vehicle and your trailer. Cross the safety chains under the CAUTION: tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the hitch.
Page 333: Following Distance
Following Distance Towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get Stay at least twice as far behind the vehicle ahead as to know your rig. Acquaint yourself with the feel of you would when driving your vehicle without a trailer.
Page 334: Making Turns
Making Turns Driving On Grades Reduce speed and shift to a lower gear before you start Notice: Making very sharp turns while trailering down a long or steep downgrade. If you don’t shift could cause the trailer to come in contact with the down, you might have to use your brakes so much that vehicle.
Page 335: Parking On Hills
Parking on Hills When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down CAUTION: while you: • start your engine, You really should not park your vehicle, with a •...
Page 336: Trailer Wiring Harness
Trailer Wiring Harness The seven-wire harness contains the following trailer circuits: Heavy-Duty Trailer Wiring Package • Yellow: Left Stop/Turn Signal • Dark Green: Right Stop/Turn Signal • Brown: Taillamps • White: Ground • Light Green: Back-up Lamps • Red w/ Black Stripe: Battery Feed* •...
Page 337: Trailer Recommendations
Electric Brake Control Wiring Trailer Recommendations Provisions You must subtract your hitch loads from the Cargo Weight Rating (CWR). CWR is the maximum weight of These wiring provisions are included with your vehicle the load your vehicle can carry. It doesn’t include as part of the heavy-duty trailer wiring package.
Page 338 NOTES 4-56...
Page 339: Service And Appearance Care
Section 5 Service and Appearance Care Service ............5-3 Cooling System ..........5-29 Accessories and Modiﬁcations ......5-3 Engine Fan Noise .........5-34 California Proposition 65 Warning .....5-3 Power Steering Fluid ........5-34 California Perchlorate Materials Requirements ..5-4 Windshield Washer Fluid ........5-35 Doing Your Own Service Work ......5-4 Brakes ............5-36 Adding Equipment to the Outside Battery ............5-39...
Page 340 Section 5 Service and Appearance Care Tire Inspection and Rotation ......5-67 Weatherstrips ..........5-101 When It Is Time for New Tires .......5-69 Washing Your Vehicle ........5-102 Buying New Tires .........5-70 Cleaning Exterior Lamps/Lenses ....5-102 Different Size Tires and Wheels ......5-72 Finish Care ..........5-102 Uniform Tire Quality Grading ......5-72 Windshield, Backglass, and Wiper Blades ..5-103 Wheel Alignment and Tire Balance ....5-74...
Page 341: Service
Service Accessories and Modiﬁcations When non-dealer/non-retailer accessories are added to For service and parts needs, visit your dealer/retailer. your vehicle they can affect your vehicle’s performance You will receive genuine GM parts and GM-trained and and safety, including such things as, airbags, braking, supported service people.
Page 342: California Perchlorate Materials Requirements
California Perchlorate Materials If you want to do some of your own service work, you should use the proper service manual. It tells you much Requirements more about how to service your vehicle than this manual can. To order the proper service manual, see Certain types of automotive applications, such as airbag Service Publications Ordering Information on page 7-14.
Page 343: Fuel
Fuel Gasoline Speciﬁcations At a minimum, gasoline should meet ASTM speciﬁcation Use of the recommended fuel is an important part of the D 4814 in the United States or CAN/CGSB-3.5 or 3.511 proper maintenance of your vehicle. To help keep the in Canada.
Page 344: Additives
Additives Some gasolines that are not reformulated for low emissions can contain an octane-enhancing additive To provide cleaner air, all gasolines in the United States called methylcyclopentadienyl manganese tricarbonyl are now required to contain additives that help prevent (MMT); ask the attendant where you buy gasoline engine and fuel system deposits from forming, allowing whether the fuel contains MMT.
Page 345: Filling The Tank
Filling the Tank CAUTION: Fuel vapor burns violently and a fuel ﬁre can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling. Do not smoke if you are near fuel or refueling your vehicle.
Page 346 CAUTION: Fuel can spray out on you if you open the fuel cap too quickly. If you spill fuel and then something ignites it, you could be badly burned. This spray can happen if your tank is nearly full, and is more likely in hot weather. Open the fuel cap slowly and wait for any hiss noise to stop.
Page 347: Filling A Portable Fuel Container
Filling a Portable Fuel Container If your vehicle has a Driver Information Center (DIC), the TIGHTEN GAS CAP message will be displayed if the fuel cap is not properly installed. CAUTION: CAUTION: Never ﬁll a portable fuel container while it is in your vehicle.
Page 348: Checking Things Under The Hood
Checking Things Under Hood Release the Hood To open the hood do the following: 1. Pull the handle with this symbol on it. It is CAUTION: located inside the vehicle to the lower left of the steering wheel. An electric fan under the hood can start up and injure you even when the engine is not running.
Page 349 3. Push the secondary hood release to the right. 4. Lift the hood. Before closing the hood, be sure all the ﬁller caps are on properly. Then bring the hood from full open to within 6 inches (152 mm) from the closed position, pause, then push the front center of the hood with a swift, ﬁrm motion to fully close the hood.
Page 350: Engine Compartment Overview
Engine Compartment Overview When you open the hood on the 6.2L engine this is what you will see: 5-12...
Page 351: Engine Oil
A. Engine Air Cleaner/Filter. See Engine Air L. Brake Master Cylinder Reservoir. See “Brake Fluid” Cleaner/Filter on page 5-17. under Brakes on page 5-36. B. Air Filter Restriction Indicator (If Equipped). M. Underhood Fuse Block. See Underhood Fuse Block See Engine Air Cleaner/Filter on page 5-17. on page 5-111.
Page 352: When To Add Engine Oil
When to Add Engine Oil See Engine Compartment Overview on page 5-12 for the location of the engine oil ﬁll cap. If the oil is below the cross-hatched area at the tip of the dipstick, add at least one quart/liter of the Be sure to add enough oil to put the level somewhere in recommended oil.
Page 353: What Kind Of Engine Oil To Use
What Kind of Engine Oil to Use These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. • Oils meeting these requirements should have the starburst symbol on the container. This symbol indicates that the oil has been certiﬁed by the...
Page 354: Engine Oil Additives
Engine Oil Additives people who will perform this work using genuine parts and reset the system. It is also important to check the oil Do not add anything to the oil. The recommended regularly and keep it at the proper level. oils with the starburst symbol that meet If the system is ever reset accidentally, you must GM Standard GM6094M are all you need for good...
Page 355: Engine Air Cleaner/Filter
What to Do with Used Oil Engine Air Cleaner/Filter Used engine oil contains certain elements that can be See Engine Compartment unhealthy for your skin and could even cause cancer. Overview on page 5-12 for Do not let used oil stay on your skin for very long. Clean the location of the engine your skin and nails with soap and water, or a good air cleaner/ﬁlter and the air...
Page 356 How to Inspect the Engine Air Replacing the Engine Air Cleaner/Filter and Resetting the Air Filter Restriction Cleaner/Filter Indicator Vehicles With an Air Filter Restriction 1. Locate the air Indicator cleaner/ﬁlter assembly. Locate the air ﬁlter restriction indicator on the engine air See Engine cleaner/ﬁlter cover.
Page 357 CAUTION: Operating the engine with the air cleaner/ﬁlter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop ﬂames if the engine backﬁres. If it is not there and the engine backﬁres, you could be burned.
Page 358: Automatic Transmission Fluid
Automatic Transmission Fluid How to Check Automatic Transmission Fluid When to Check and Change Automatic Notice: Too much or too little ﬂuid can damage Transmission Fluid your transmission. Too much can mean that some of the ﬂuid could come out and fall on hot engine It is usually not necessary to check the transmission parts or exhaust system parts, starting a ﬁre.
Page 359 6. Using the TRANS TEMP reading, determine and 3. Install the dipstick by pushing it back in all the way, perform the appropriate check procedure. If the wait three seconds, and then pull it back out again. TRANS TEMP reading is not within the required 4.
Page 360 Hot Check Procedure 4. Check both sides of the dipstick, and read the lower level. Repeat the check procedure to Use this procedure to check the transmission ﬂuid level verify the reading. when the transmission ﬂuid temperature is between 160°F and 200°F (71°C and 93°C). The hot check is the most accurate method to check the ﬂuid level.
Page 361: Engine Coolant
Consistency of Readings A 50/50 mixture of clean, drinkable water and ® DEX-COOL coolant will: Always check the ﬂuid level at least twice using Give freezing protection down to −34°F (−37°C). • the procedures described. Consistency • (repeatable readings) is important to maintaining proper Give boiling protection up to 265°F (129°C).
Page 362 What to Use Notice: If you use an improper coolant mixture, your engine could overheat and be badly damaged. Use a mixture of one-half clean, drinkable water and The repair cost would not be covered by your ® one-half DEX-COOL coolant which will not damage warranty.
Page 363: Checking Coolant
Checking Coolant CAUTION: Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly. Never turn the surge tank pressure cap — even a little — when the engine and radiator are hot.
Page 364: Adding Coolant
Adding Coolant Coolant Surge Tank Pressure Cap ® If more coolant is needed, add the proper DEX-COOL Notice: If the pressure cap is not tightly installed, coolant mixture at the surge tank, but only when the coolant loss and possible engine damage may engine is cool.
Page 365: If Steam Is Coming From Your Engine
If Steam Is Coming From Your Engine Notice: If your engine catches ﬁre because you keep driving with no coolant, your vehicle can be badly damaged. The costly repairs would not be covered by your warranty. See Overheated Engine CAUTION: Protection Operating Mode on page 5-28 for information on driving to a safe place in an emergency.
Page 366: Overheated Engine Protection Operating Mode
If you get the ENGINE OVERHEATED STOP ENGINE If you still have the warning, turn off the engine and get or the ENGINE OVERHEATED IDLE ENGINE message everyone out of the vehicle until it cools down. Also, with no sign of steam, try this for a minute or so: see “Overheated Engine Protection Operating Mode”...
Page 367: Cooling System
Cooling System CAUTION: When you decide it is safe to lift the hood, here is what you will see: An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing, and tools away from any underhood electric fan.
Page 368 CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine ﬁre, and you could be burned.
Page 369: How To Add Coolant To The Coolant Surge Tank
How to Add Coolant to the Coolant Surge Tank CAUTION: If you have not found a problem yet, check to see if coolant is visible in the surge tank. If coolant is visible Adding only plain water to the cooling system but the coolant level is not at or above the FULL COLD can be dangerous.
Page 370 Notice: In cold weather, water can freeze and crack the engine, radiator, heater core and other parts. 1. You can remove the Use the recommended coolant and the proper coolant surge tank coolant mixture. pressure cap when the cooling system, including the coolant CAUTION: surge tank pressure...
Page 371 3. Fill the coolant surge tank with the proper mixture, 4. With the coolant surge tank pressure cap off, start to the FULL COLD mark. the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan.
Page 372: Engine Fan Noise
Engine Fan Noise When to Check Power Steering Fluid It is not necessary to regularly check power steering ﬂuid Your vehicle has electric cooling fans. You might hear unless you suspect there is a leak in the system or the fans spinning at low speed during most everyday you hear an unusual noise.
Page 373: Windshield Washer Fluid
What to Use Open the cap with the washer symbol on it. To determine what kind of ﬂuid to use, see Add washer ﬂuid until the Recommended Fluids and Lubricants on page 6-12. tank is full. See Engine Always use the proper ﬂuid. Compartment Overview on page 5-12 for reservoir Notice: Use of the incorrect ﬂuid may damage your...
Page 374: Brakes
Brakes It is not a good idea to top off the brake ﬂuid. Adding brake ﬂuid will not correct a leak. If ﬂuid is added when the linings are worn, there will be too much ﬂuid when Brake Fluid new brake linings are installed. Add or remove brake ﬂuid, as necessary, only when work is done on the brake The brake master cylinder hydraulic system.
Page 375 Checking Brake Fluid Always clean the brake ﬂuid reservoir cap and the area around the cap before removing it. This helps keep dirt The brake ﬂuid can be checked without taking off the from entering the reservoir. cap by looking at the brake ﬂuid reservoir. The ﬂuid level should be CAUTION: above MIN.
Page 376: Brake Wear
Brake Wear Some driving conditions or climates can cause a brake squeal when the brakes are ﬁrst applied or lightly Your vehicle has disc brakes. Disc brake pads have applied. This does not mean something is wrong with built-in wear indicators that make a high-pitched warning the brakes.
Page 377: Battery
Replacing Brake System Parts Vehicle Storage The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if CAUTION: the vehicle is to have really good braking. Your vehicle was designed and tested with top-quality brake parts. When you replace parts of the braking system —...
Page 378: Jump Starting
Jump Starting Notice: Ignoring these steps could result in costly damage to your vehicle that would not be covered by your warranty. If your vehicle’s battery (or batteries) has run down, you may want to use another vehicle and some jumper Trying to start your vehicle by pushing or pulling it cables to start your vehicle.
Page 379 Notice: If you leave your radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by your warranty. Always turn off your radio and other accessories when jump starting your vehicle. 3.
Page 380 CAUTION: (Continued) CAUTION: Be sure the battery has enough water. You do An electric fan can start up even when the not need to add water to the battery installed engine is not running and can injure you. Keep in your new vehicle. But if a battery has ﬁller hands, clothing and tools away from any caps, be sure the right amount of ﬂuid is there.
Page 381 5. Check that the jumper cables do not have loose 7. Do not let the other end touch metal. Connect it to or missing insulation. If they do, you could get a the positive (+) terminal of the good battery. Use a shock.
Page 382 Notice: If the jumper cables are connected or To disconnect the jumper cables from both vehicles do removed in the wrong order, electrical shorting may the following: occur and damage the vehicle. The repairs would 1. Disconnect the black negative (−) cable from the not be covered by your warranty.
Page 383: All-Wheel Drive
All-Wheel Drive How to Check Lubricant Transfer Case If your vehicle is equipped with All-Wheel Drive, be sure to perform the lubricant checks described in this section. There are two additional systems that need lubrication. When to Check Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant.
Page 384: Rear Axle
Rear Axle How to Check Lubricant When to Check Lubricant It is not necessary to regularly check rear axle ﬂuid unless you suspect there is a leak or you hear an unusual noise. A ﬂuid loss could indicate a problem. Have it inspected and repaired.
Page 385: Front Axle
What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 6-12. Front Axle When to Check and Change Lubricant It is not necessary to regularly check front axle ﬂuid unless you suspect there is a leak or you hear an unusual noise.
Page 386: Headlamp Aiming
Headlamp Aiming • Have the tires properly inﬂated. • Have the spare tire is in its proper location in the The vehicle has a visual optical headlamp aiming vehicle. system. The aim of the headlamps have been preset Headlamp aiming is done with the vehicle’s low-beam at the factory and should need no further adjustment.
Page 387 4. At a wall, measure from the ground upward (A) to the recorded distance from Step 3 and mark it. 5. Draw or tape a horizontal line (B) on the wall the width of the vehicle at the height of the mark 7.
Page 388: Bulb Replacement
Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 5-52. For any bulb changing procedure not listed in this section, contact your dealer/retailer. Halogen Bulbs CAUTION: 9. Make sure that the light from the headlamp is positioned at the bottom edge of the horizontal tape Halogen bulbs have pressurized gas inside line.
Page 389: Taillamps, Turn Signal, Stoplamps And Back-Up Lamps
Taillamps, Turn Signal, Stoplamps To replace one of these bulbs: and Back-up Lamps 1. Remove the two screws from the taillamp assembly. A. Stoplamp/Taillamp B. Turn Signal/Taillamp C. Back-up Lamp 2. Remove the taillamp assembly. 3. Press the release tab, if equipped, and turn the socket counterclockwise to remove it from the taillamp assembly.
Page 390: License Plate Lamp
License Plate Lamp 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 4. Install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the license plate lamp. Replacement Bulbs Exterior Lamp Bulb Number Back-up Lamp 7441 License Plate Lamp...
Page 391: Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 6-4. Replacement blades come in different types and are removed in different ways. To replace the wiper blade assembly: 1. Pull the windshield wiper arm connector away from the windshield.
Page 392: Backglass Wiper Blade Replacement
Backglass Wiper Blade Replacement 1. Lift the wiper blade assembly up and out of the park rest position. 4. Replace the wiper blade. 5. Return the wiper blade assembly to the park rest position. 2. Pull the wiper blade assembly away from the backglass.
Page 393: Tires
Tires CAUTION: (Continued) Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever • Overinﬂated tires are more likely to have questions about your tire warranty and where be cut, punctured, or broken by a to obtain service, see your vehicle Warranty sudden impact —...
Page 394: Tire Sidewall Labeling
Tire Sidewall Labeling (B) TPC Spec (Tire Performance Criteria Speciﬁcation) Original equipment tires designed Useful information about a tire is molded into the to GM’s speciﬁc tire performance criteria have sidewall. The following illustration is an example a TPC speciﬁcation code molded onto the sidewall. of a typical P-Metric tire sidewall.
Page 395 (G) Maximum Cold Inﬂation Load (B) Tire Width The three-digit number indicates Limit Maximum load that can be carried and the the tire section width in millimeters from sidewall maximum pressure needed to support that load. to sidewall. For information on recommended tire pressure see (C) Aspect Ratio A two-digit number that Inﬂation - Tire Pressure on page 5-60 and Loading...
Page 396: Tire Terminology And Deﬁnitions
Tire Terminology and Deﬁnitions Curb Weight The weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil, and coolant, but Air Pressure The amount of air inside the tire without passengers and cargo. pressing outward on each square inch of the tire.
Page 397 Load Index An assigned number ranging from Passenger (P-Metric) Tire A tire used on 1 to 279 that corresponds to the load carrying passenger cars and some light duty trucks and capacity of a tire. multipurpose vehicles. Maximum Inﬂation Pressure The maximum air Recommended Inﬂation Pressure Vehicle...
Page 398: Inﬂation - Tire Pressure
Inﬂation - Tire Pressure Treadwear Indicators Narrow bands, sometimes called wear bars, that show across the tread of a tire when only 1/16 inch (1.6 mm) of tread Tires need the correct amount of air pressure to remains. See When It Is Time for New Tires operate effectively.
Page 399 How to Check A vehicle speciﬁc Tire and Loading Information label is attached to your vehicle. This label shows Use a good quality pocket-type gage to check tire your vehicle’s original equipment tires and the pressure. You cannot tell if your tires are properly correct inﬂation pressures for your tires when they inﬂated simply by looking at them.
Page 400: High-Speed Operation
High-Speed Operation and Loading Information label. See Loading Your Vehicle on page 4-34 and Inﬂation - Tire Pressure on page 5-60. CAUTION: Tire Pressure Monitor System Driving at high speeds, 100 mph (160 km/h) or The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels.
Page 401 Federal Communications Commission Under-inﬂation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping (FCC) and Industry and Science ability. Canada Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to The Tire Pressure Monitor System (TPMS) operates on maintain correct tire pressure, even if under-inﬂation has a radio frequency and complies with Part 15 of the...
Page 402: Tire Pressure Monitor Operation
Tire Pressure Monitor Operation Using the DIC, tire pressure levels can be viewed by the driver. For additional information and details about The Tire Pressure Monitor System (TPMS) is designed the DIC operation and displays see DIC Operation and to warn the driver when a low tire pressure condition Displays (Using DIC Buttons) on page 3-49 or DIC exists.
Page 403: Tpms Malfunction Light And Message
TPMS Malfunction Light and Message • One or more TPMS sensors are missing or damaged. The DIC message and the TPMS The TPMS will not function properly if one or more of the malfunction light should go off when the TPMS TPMS sensors are missing or inoperable.
Page 404: Tpms Sensor Matching Process
TPMS Sensor Matching Process The TPMS sensor matching process is outlined below: 1. Set the parking brake. Each TPMS sensor has a unique identiﬁcation code. Any time you rotate your vehicle’s tires or replace one or 2. Turn the ignition switch to ON/RUN with the more of the TPMS sensors, the identiﬁcation codes engine off.
Page 405: Tire Inspection And Rotation
Tire Inspection and Rotation 7. Proceed to the passenger side rear tire, and repeat the procedure in Step 5. We recommend that you regularly inspect your 8. Proceed to the driver side rear tire, and repeat the vehicle’s tires, including the spare tire, for signs of procedure in Step 5.
Page 406 Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Speciﬁcations on page 5-114. CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time.
Page 407: When It Is Time For New Tires
When It Is Time for New Tires You need new tires if any of the following statements are true: Various factors, such as maintenance, temperatures, • You can see the indicators at three or more places driving speeds, vehicle loading, and road conditions, around the tire.
Page 408: Buying New Tires
Buying New Tires GM recommends replacing tires in sets of four. This is because uniform tread depth on all tires will help keep GM has developed and matched speciﬁc tires for your your vehicle performing most like it did when the tires vehicle.
Page 409 If you must replace your vehicle’s tires with those that do not have a TPC Spec number, make sure they are CAUTION: (Continued) the same size, load range, speed rating, and construction type (radial and bias-belted tires) as your vehicle’s Your vehicle may have a different size spare original tires.
Page 410: Different Size Tires And Wheels
Different Size Tires and Wheels Uniform Tire Quality Grading If you add wheels or tires that are a different size than Quality grades can be found where applicable on your original equipment wheels and tires, this could the tire sidewall between tread shoulder and affect the way your vehicle performs, including its maximum section width.
Page 411 Treadwear Temperature – A, B, C The treadwear grade is a comparative rating The temperature grades are A (the highest), B, based on the wear rate of the tire when tested and C, representing the tire’s resistance to the under controlled conditions on a speciﬁed generation of heat and its ability to dissipate heat government test course.
Page 412: Wheel Alignment And Tire Balance
Wheel Alignment and Tire Balance Wheel Replacement The tires and wheels on your vehicle were aligned Replace any wheel that is bent, cracked, or badly rusted and balanced carefully at the factory to give you the or corroded. If wheel nuts keep coming loose, the longest tire life and best overall performance.
Page 413: Used Replacement Wheels
Used Replacement Wheels CAUTION: CAUTION: Using the wrong replacement wheels, wheel bolts, or wheel nuts on your vehicle can be Putting a used wheel on your vehicle is dangerous. It could affect the braking and dangerous. You cannot know how it has been handling of your vehicle, make your tires lose used or how far it has been driven.
Page 414: Tire Chains
Tire Chains CAUTION: (Continued) CAUTION: a crash. Use another type of traction device only if its manufacturer recommends it for use on your vehicle and tire size combination and Do not use tire chains. There is not enough road conditions. Follow that manufacturer’s clearance.
Page 415: If A Tire Goes Flat
If a Tire Goes Flat CAUTION: It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is much more likely to leak out Lifting a vehicle and getting under it to do slowly.
Page 416: Changing A Flat Tire
Changing a Flat Tire CAUTION: (Continued) If a tire goes ﬂat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your vehicle’s 3. Turn off the engine and do not restart hazard warning ﬂashers. See Hazard Warning Flashers while the vehicle is raised.
Page 417: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools The equipment you will need to change a ﬂat tire is stored under the storage tray, which is located on the driver’s side trim panel (over the rear wheelhouse). The following information tells you how to use the jack and change a tire.
Page 418 A. Jack D. Jack Handle 2. Remove the wing nut (B) used to retain the tool bag B. Wheel Blocks Extensions by turning it counterclockwise. C. Jack Handle E. Wheel Wrench 3. Turn the knob (A) on the jack counterclockwise to release the jack and wheel blocks from the bracket.
Page 419 To access the spare tire: H. Spare Tire (Valve J. Hoist End of Stem Pointed Down) Extension Tool I. Hoist Shaft K. Spare Tire Lock Access Hole 1. To reach the hoist shaft access cover (C), you will ﬁrst need to remove the hitch cover. Remove it by turning the two fasteners located at the bottom of the cover counterclockwise and then pull the cover down and rotate towards you.
Page 420 4. Assemble the two jack handle extensions (D) and wheel wrench (E) as shown. 3. To remove the spare tire lock, insert the ignition key, turn it clockwise and then pull straight back. 5-82...
Page 421 5. Insert the open end of 6. Turn the wheel wrench (E) counterclockwise to the extension (J) lower the spare tire (H) to the ground. Continue to through the hole in the turn the wheel wrench until the spare tire can be rear bumper (I) (hoist pulled out from under the vehicle.
Page 422 Once the retainer is separated from the guide pin, tilt the retainer and pull it through the center of the wheel along with the cable and latch. 8. Tilt the tire toward the vehicle with some slack in 9. Put the spare tire near the ﬂat tire. the cable to access the tire/wheel retainer (G).
Page 423: Removing The Flat Tire And Installing The Spare Tire
Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before proceeding. See Changing a Flat Tire on page 5-78 for more information. 3. Use the wheel wrench to loosen all the wheel nuts. Turn the wheel wrench counterclockwise to loosen the wheel nuts.
Page 424 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Raising your vehicle with the jack improperly Jacking Locations (Overall View) positioned can damage the vehicle and even...
Page 425 Front Position Rear Position Front Tire Flat: If the ﬂat tire is on a front tire of Rear Tire Flat: If the ﬂat tire is on a rear tire of the the vehicle, you will need to use the jack handle (B) vehicle, you will need to use the jack handle (B) and only one jack handle extension (C).
Page 426 5. Remove all of the wheel nuts. CAUTION: (Continued) but be sure to use a scraper or wire brush later, if needed, to get all the rust or dirt off. See Changing a Flat Tire on page 5-78. 7. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel.
Page 427 8. Put the wheel nuts back on with the rounded end Notice: Improperly tightened wheel nuts can lead of the nuts toward the wheel after mounting the to brake pulsation and rotor damage. To avoid spare tire. expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper 9.
Page 428: Secondary Latch System
Secondary Latch System To release the spare tire from the secondary latch: 1. Check under the Your vehicle has an underbody-mounted tire hoist vehicle to see if the assembly equipped with a secondary latch system. cable end is visible. It is designed to stop the spare tire from suddenly If the cable is not falling off your vehicle.
Page 429 3. Loosen the cable by turning the wrench counterclockwise three or four turns. 4. Repeat this procedure at least two times. If the spare tire lowers to the ground, continue with Step 5 of Removing the Spare Tire and Tools on page 5-79.
Page 430 10. Turn the wrench clockwise to raise the jack until it lifts the end ﬁtting. 11. Continue raising the jack until the spare tire stops moving upward and is held ﬁrmly in place. The secondary latch has released and the spare tire is balancing on the jack.
Page 431 CAUTION: Someone standing too close during the procedure could be injured by the jack. If the spare tire does not slide off the jack completely, make sure no one is behind you or on either side of you as you pull the jack out from under the spare.
Page 432: Storing A Flat Or Spare Tire And Tools
Storing a Flat or Spare Tire Store the tire under the rear of the vehicle in the spare tire carrier. and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone.
Page 433 G. Tire/Wheel Retainer I. Hoist Shaft Access Hole H. Spare Tire/Flat Tire J. Hoist End of (Valve Stem Extension Tool Pointed Down) K. Spare Tire Lock 1. Put the tire (H) on the ground at the rear of the vehicle with the valve stem pointed down and to the rear.
Page 434 4. Insert the open end of the extension (J) through the hole in the rear bumper (I) (hoist shaft access hole). 5. Raise the tire part way upward. Make sure the retainer is seated in the wheel opening. 6. Raise the tire fully against the underside of the 7.
Page 435 To store the tools: 3. Position the jack (E) and wheel blocks (A) in the driver’s side trim panel over the wheelhouse. 4. Turn the wing nut (G) clockwise until the jack is secured tight in the mounting bracket. Be sure to position the holes in the base of the jack onto the pin in the mounting bracket.
Page 436: Spare Tire
Spare Tire Appearance Care Your vehicle, when new, had a fully-inﬂated spare tire. Interior Cleaning A spare tire may lose air over time, so check its inﬂation pressure regularly. See Inﬂation - Tire Pressure Your vehicle’s interior will continue to look its best if it is on page 5-60 and Loading Your Vehicle on page 4-34 cleaned often.
Page 437 surfaces for which they were not intended. Use glass Do not clean your vehicle using the following cleaners cleaner only on glass. Remove any accidental over-spray or techniques: from other surfaces immediately. To prevent over-spray, • Never use a knife or any other sharp object to apply cleaner directly to the cleaning cloth.
Page 438: Fabric/Carpet
Fabric/Carpet If any of the soil remains, a commercial fabric cleaner or spot lifter may be necessary. When a commercial upholstery cleaner or spot lifter is to be used, test a Use a vacuum cleaner with a soft brush attachment small hidden area for colorfastness ﬁrst.
Page 439: Instrument Panel, Vinyl, And Other Plastic Surfaces
Instrument Panel, Vinyl, and Other Speaker Covers Plastic Surfaces Vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with just A soft cloth dampened with water may be used to water and mild soap. remove dust.
Page 440: Washing Your Vehicle
Washing Your Vehicle High pressure car washes may cause water to enter the vehicle. Avoid using high pressure washes closer than The best way to preserve your vehicle’s ﬁnish is to keep 12 inches (30 cm) to the surface of the vehicle. Use of it clean by washing it often.
Page 441: Windshield, Backglass, And Wiper Blades
Notice: Machine compounding or aggressive Use special care with aluminum trim. To avoid damaging polishing on a basecoat/clearcoat paint ﬁnish may protective trim, never use auto or chrome polish, damage it. Use only non-abrasive waxes and steam or caustic soap to clean aluminum. A coating of polishes that are made for a basecoat/clearcoat wax, rubbed to high polish, is recommended for all paint ﬁnish on your vehicle.
Page 442: Aluminum Wheels
Aluminum Wheels Notice: If you drive your vehicle through an automatic car wash that has silicone carbide tire cleaning brushes, you could damage the aluminum Notice: If you use strong soaps, chemicals, or chrome-plated wheels. The repairs would not abrasive polishes, cleaners, brushes, or cleaners be covered by your warranty.
Page 443: Sheet Metal Damage
Sheet Metal Damage Underbody Maintenance If the vehicle is damaged and requires sheet metal Chemicals used for ice and snow removal and dust repair or replacement, make sure the body repair shop control can collect on the underbody. If these are not applies anti-corrosion material to parts repaired or removed, corrosion and rust can develop on the replaced to restore corrosion protection.
Page 444: Vehicle Care/Appearance Materials
Vehicle Care/Appearance Materials Description Usage Removes swirl marks, ﬁne Swirl Remover Polish scratches, and other light Description Usage surface contamination. Interior and exterior Polishing Cloth Removes light scratches polishing cloth. Cleaner Wax and protects ﬁnish. Tar and Road Oil Removes tar, road oil, and Cleans, shines, and Remover asphalt.
Page 445: Vehicle Identiﬁcation
Vehicle Identiﬁcation Engine Identiﬁcation The eighth character in the VIN is the engine code. This code helps you identify your vehicle’s engine, Vehicle Identiﬁcation Number (VIN) speciﬁcations, and replacement parts. See Capacities and Speciﬁcations on page 5-114 for your vehicle’s engine code.
Page 446: Electrical System
Electrical System Power Windows and Other Power Options Add-On Electrical Equipment Circuit breakers protect the power windows and other power accessories. If the current load is too heavy, Notice: Do not add anything electrical to your the circuit breaker opens and then closes after a cool vehicle unless you check with your dealer/retailer down period, protecting the circuit until the problem ﬁrst.
Page 447 Instrument Panel Fuse Block Fuses Usage The instrument panel fuse block access door is located Instrument Panel Back Lighting on the driver side edge of the instrument panel. Passenger Side Turn Signal, Stoplamp Passenger Door Module, Universal Home Remote System Power Door Lock 2 (Unlock Feature) Power Door Lock 2 (Lock Feature) Stoplamps, Center-High Mounted...
Page 448: Center Instrument Panel Fuse Block
Harness Harness Usage Usage Connector Connector LT DR Driver Door Harness Connection BODY 2 Body Harness Connector 2 BODY Harness Connector BODY 1 Body Harness Connector 1 BODY Harness Connector BODY 3 Body Harness Connector 3 HEADLINER 3 Headliner Harness Connector 3 Center Instrument Panel Fuse Block HEADLINER 2 Headliner Harness Connector 2 HEADLINER 1 Headliner Harness Connector 1...
Page 449: Underhood Fuse Block
Underhood Fuse Block The underhood fuse block is located in the engine compartment, on the driver side of the vehicle. Lift the Fuses Usage cover for access to the fuse/relay block. Right Trailer Stop/Turn Lamp Electronic Stability Suspension Notice: Spilling liquid on any electrical components Control, Automatic Level Control on your vehicle may damage it.
Page 450 Fuses Usage Fuses Usage Trailer Brake Controller Driver Side Park Lamps Front Washer Passenger Side Park Lamps Oxygen Sensors Fog Lamps Antilock Brakes System 2 Horn Trailer Back-up Lamps Passenger Side High-Beam Headlamp Driver Side Low-Beam Headlamp Daytime Running Lamps Engine Control Module (Battery) Driver Side High-Beam Headlamps Fuel Injectors, Ignition Coils...
Page 451 Fuses Usage J-Case Fuses Usage Power Take-Off Electric Running Boards Auxiliary Climate Control (Ignition), Heated Windshield Washer System Compass-Temperature Mirror Not Used Center High-Mounted Stoplamp Stud 1 (Trailer Connector (CHMSL) Battery Power) Rear Defogger Mid-Bussed Electrical Center 1 Heated Mirrors Climate Control Blower SEO B1 Upﬁtter Usage (Battery) Power Liftgate Module...
Page 452: Capacities And Speciﬁcations
Capacities and Speciﬁcations The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 6-12 for more information. Capacities Application English Metric For the air conditioning system refrigerant charge amount, see the refrigerant caution label located Air Conditioning Refrigerant under the hood.
Page 453 Section 6 Maintenance Schedule Maintenance Schedule ........6-2 Owner Checks and Services ......6-9 Introduction ...........6-2 At Each Fuel Fill ..........6-9 Maintenance Requirements ......6-2 At Least Once a Month ........6-9 Your Vehicle and the Environment ....6-2 At Least Once a Year ........6-10 Using the Maintenance Schedule ......6-2 Recommended Fluids and Lubricants ....6-12 Scheduled Maintenance ........6-4...
Page 454: Maintenance Schedule
Maintenance Schedule Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your Introduction vehicle in good working condition, but also helps the environment. All recommended maintenance is Important: Keep engine oil at the proper level and important.
Page 455 This schedule is for vehicles that: • CAUTION: (Continued) carry passengers and cargo within recommended limits. You will ﬁnd these limits on the Tire and Loading Information label. See Loading Your equipment for the job. If you have any doubt, Vehicle on page 4-34.
Page 456: Scheduled Maintenance
Scheduled Maintenance When the CHANGE ENGINE OIL SOON message appears, certain services, checks, and inspections are required. Required services are described in the When the CHANGE ENGINE OIL SOON message following for “Maintenance I” and “Maintenance II.” comes on, it means that service is required for your Generally, it is recommended that your ﬁrst service be vehicle.
Page 457 Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and ﬁlter. See Engine Oil on page 5-13. Reset oil life • • system. See Engine Oil Life System on page 5-16. An Emission Control Service. • • Lubricate chassis components. See footnote #. •...
Page 458: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000)
Page 459: Maintenance Footnotes
Additional Required Services (cont’d) 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000) (200 000) (240 000) Replace spark plugs and inspect • spark plug wires. An Emission Control Service. Engine cooling system service (or every ﬁve years, whichever occurs ﬁrst).
Page 460 (c) Visually inspect hoses and have them replaced if (g) Inspect system. Check all fuel and vapor lines and hoses for proper hook-up, routing, and condition. they are cracked, swollen, or deteriorated. Inspect all Check that the purge valve works properly, if equipped. pipes, ﬁttings, and clamps;...
Page 461: Owner Checks And Services
Owner Checks and Services Engine Coolant Level Check ® Check the engine coolant level and add DEX-COOL These owner checks and services should be performed coolant mixture if necessary. See Engine Coolant at the intervals speciﬁed to help ensure the safety, on page 5-23.
Page 462: At Least Once A Year
At Least Once a Year Automatic Transmission Shift Lock Control System Check Starter Switch Check CAUTION: CAUTION: When you are doing this inspection, the When you are doing this inspection, the vehicle could move suddenly. If the vehicle vehicle could move suddenly. If the vehicle moves, you or others could be injured.
Page 463: Ignition Transmission Lock Check
Ignition Transmission Lock Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the While parked, and with the parking brake set, try to turn parking brake. the ignition to LOCK/OFF in each shift lever position. •...
Page 464: Recommended Fluids And Lubricants
Recommended Fluids and Usage Fluid/Lubricant Lubricants Windshield ® Optikleen Washer Solvent. Washer Fluids and lubricants identiﬁed below by name, part GM Power Steering Fluid number, or speciﬁcation can be obtained from your Power Steering (GM Part No. U.S. 89021184, dealer/retailer. System in Canada 89021186).
Page 465 Usage Fluid/Lubricant Usage Fluid/Lubricant ® DEXRON -VI Automatic Outer Tailgate Multi-Purpose Lubricant, Superlube Transfer Case Transmission Fluid. Handle Pivot (GM Part No. U.S. 12346241, Points in Canada 10953474). Spline Lubricant, Special Lubricant Front Axle (GM Part No. U.S. 12345879, Weatherstrip Lubricant Propshaft in Canada 10953511) or lubricant (GM Part No.
Page 466: Maintenance Replacement Parts
Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your GM dealer. Maintenance Replacement Parts ® ACDelco Part Part GM Part Number Number Engine Air Cleaner/Filter 15908916 A3086C Oil Filter 89017524 PF48 Spark Plugs 12571164 41-985...
Page 467: Engine Drive Belt Routing
Engine Drive Belt Routing 6-15...
Page 468: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-2. Any additional information from Owner Checks and Services on page 6-9 can be added on the following record pages. You should retain all maintenance receipts.
Page 469 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-17...
Page 470 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-18...
Page 471: Customer Assistance Information
Section 7 Customer Assistance Information Customer Assistance and Information ....7-2 Reporting Safety Defects ........7-13 Customer Satisfaction Procedure ......7-2 Reporting Safety Defects to the United Online Owner Center ........7-4 States Government ........7-13 Customer Assistance for Text Telephone Reporting Safety Defects to the Canadian (TTY) Users ..........7-5 Government ..........7-14 Customer Assistance Offices ......7-5...
Page 472: Customer Assistance And Information
Your satisfaction and goodwill are important to the windshield. your dealer and to GMC. Normally, any concerns with the sales transaction or the operation of the vehicle • Dealership name and location.
Page 473 Although you may be required to resort to this informal The program provides for the review of the facts involved dispute resolution program prior to ﬁlling out a court by an impartial third party arbiter, and may include an action, use of the program is free of charge and your case informal hearing before the arbiter.
Page 474: Online Owner Center
Online Owner Center My GM Canada (Canada only) My GM Canada is a password-protected section of (United States only) gmcanada.com where you can save information on GM vehicles, get personalized offers, and use handy tools The Owner Center is a resource for your GM ownership and forms with greater ease.
Page 475: Customer Assistance For Text Telephone
GMC encourages customers to call the toll-free number (For Text Telephone devices (TTYs)) for assistance. However, if a customer wishes to Roadside Assistance: 1-800-268-6800 write or e-mail GMC, the letter should be addressed to: United States All Overseas Locations GMC Customer Assistance Center Please contact the local General Motors Business Unit.
Page 476: Gm Mobility Reimbursement Program
(TTY): 1-888-889-2438). For vehicles purchased in Canada, call 1-800-268-6800. Service is available 24 hours a day, 365 days a year. As the owner of a new GMC vehicle, you are automatically enrolled in the GMC Roadside Assistance program. Who is Covered? This program, available to qualiﬁed applicants, can...
Page 477 • Please allow three weeks before your planned Lock-out Service: Lock-out service will be covered departure date. In Canada, trip routing requests will at no charge if you are unable to gain entry into your be limited to six per calendar year. vehicle.
Page 478: Calling For Assistance
ﬁnes, impound towing caused by a violation of local, Municipal, State, GMC and General Motors of Canada Limited reserve Provincial, or Federal law, and mounting, dismounting or the right to limit services or reimbursement to an owner changing of snow tires, chains, or other traction devices.
Page 479: Courtesy Transportation
Courtesy Transportation Transportation Options Warranty service can generally be completed while you To enhance your ownership experience, we and our wait. However, if you are unable to wait, GM helps to participating dealers are proud to offer Courtesy minimize your inconvenience by providing several Transportation, a customer support program for vehicles transportation options.
Page 480: Collision Damage Repair
Courtesy Rental Vehicle Collision Damage Repair Your dealer may arrange to provide you with a courtesy If your vehicle is involved in a collision and it is rental vehicle or reimburse you for a rental vehicle damaged, have the damage repaired by a qualiﬁed that you obtain if your vehicle is kept for an overnight technician using the proper equipment and quality warranty repair.
Page 481: Insuring Your Vehicle
Insuring Your Vehicle Aftermarket collision parts are also available. These are made by companies other than GM and may not Protect your investment in your GM vehicle with have been tested for your vehicle. As a result, these comprehensive and collision insurance coverage. There parts may ﬁt poorly, exhibit premature are signiﬁcant differences in the quality of coverage durability/corrosion problems, and may not perform...
Page 482: If A Crash Occurs
If a Crash Occurs • Gather the important information you will need from the other driver. Things like name, address, phone Here is what to do if you are involved in a crash. number, driver’s license number, vehicle license • Try to relax and then check to make sure you are plate, vehicle make, model and model year, Vehicle all right.
Page 483: Reporting Safety Defects
Managing the Vehicle Damage Repair Reporting Safety Defects Process Reporting Safety Defects to the In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its United States Government repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there.
Page 484: Reporting Safety Defects To The Canadian Government
In addition to notifying NHTSA (or Transport Canada) in a situation like this, please notify General Motors. Owner publications are written speciﬁcally for owners Call 1-800-GMC-8782 (1-800-462-8782), or write: and intended to provide basic operational information about the vehicle. The owner manual includes the GMC Customer Assistance Center Maintenance Schedule for all models.
Page 485: Current And Past Model Order Forms
Current and Past Model Order Forms Vehicle Data Recording and Privacy Technical Service Bulletins and Manuals are available for current and past model GM vehicles. To request an order form, specify year and model name of Your GM vehicle has a number of sophisticated the vehicle.
Page 486: Event Data Recorders
Event Data Recorders This data can help provide a better understanding of the circumstances in which crashes and injuries occur. This vehicle has an Event Data Recorder (EDR). The Important: EDR data is recorded by your vehicle only main purpose of an EDR is to record, in certain crash or if a non-trivial crash situation occurs;...
Page 487: Onstar
® OnStar Radio Frequency Identiﬁcation (RFID) If your vehicle has OnStar and you subscribe to the OnStar services, please refer to the OnStar Terms and RFID technology is used in some vehicles for functions Conditions for information on data collection and use. such as tire pressure monitoring and ignition system ®...
Page 488 NOTES 7-18...
Page 489 Appearance Care Aluminum Wheels ........5-104 Accessories and Modiﬁcations ......5-3 Care of Safety Belts ........5-101 Adding Equipment to Your Airbag-Equipped Chemical Paint Spotting ......5-105 Vehicle ............1-90 Cleaning Exterior Lamps/Lenses ....5-102 Additives, Fuel ..........5-6 Fabric/Carpet ..........5-100 Add-On Electrical Equipment ......
Page 490 Audio System (cont.) Bulb Replacement (cont.) Theft-Deterrent Feature ....... 3-116 Replacement Bulbs ........5-52 XM™ Satellite Radio Antenna System ... 3-119 Taillamps, Turn Signal, Stoplamps and Audio System(s) ..........3-76 Back-up Lamps ........5-51 Rear Side Window Antenna ......3-119 Buying New Tires ...........
Page 491 Child Restraints (cont.) Cleaning (cont.) Lower Anchors and Tethers for Children ..1-60 Climate Control System Older Children ..........1-49 Dual Automatic ..........3-23 Securing a Child Restraint in a Rear Seat Outlet Adjustment ........3-29 Position ..........1-68 Rear Air Conditioning and Heating System, Securing a Child Restraint in the Center Electronic ..........
Page 492 Customer Assistance Information (cont.) Driving Reporting Safety Defects to General Motors ..7-14 At Night ............. 4-25 Reporting Safety Defects to the Canadian Before a Long Trip ........4-27 Government ..........7-14 Defensive ............. 4-2 Reporting Safety Defects to the United Drunken ............
Page 493 Engine Flash-to-Pass ........... 3-9 Air Cleaner/Filter ......... 5-17 Flat Tire ............5-77 Check and Service Engine Soon Light .... 3-42 Flat Tire, Changing ......... 5-78 Coolant ............5-23 Flat Tire, Storing ..........5-94 Coolant Heater ..........2-29 Fluid ............. 5-20 Coolant Temperature Gage ......
Page 494 Headlamps (cont.) Halogen Bulbs ..........5-50 Gage High/Low Beam Changer ........ 3-9 Engine Coolant Temperature ......3-41 On Reminder ..........3-17 Fuel ............3-48 Heated Seats ........... 1-4 Oil Pressure ..........3-45 Heated Steering Wheel ........3-7 Speedometer ..........3-33 Heater ............
Page 495 Instrument Panel (I/P) Liftgate, Power ..........2-15 Brightness ..........3-19 Liftgate/Liftglass ..........2-13 Cluster ............3-32 Liftglass/Liftgate ..........2-13 Light Airbag Readiness ........3-34 Antilock Brake System Warning ..... 3-40 Brake System Warning ......... 3-39 Jump Starting ..........5-40 Charging System ......... 3-37 Cruise Control ..........
Page 496 Loading Your Vehicle ........4-34 Maintenance Schedule (cont.) Locking Differential ........... 4-5 Maintenance Replacement Parts ....6-14 Lockout Protection .......... 2-12 Maintenance Requirements ......6-2 Locks Owner Checks and Services ......6-9 Delayed Locking .......... 2-11 Recommended Fluids and Lubricants ..... 6-12 Door ............
Page 497 Odometer ............3-33 Paint, Damage ..........5-105 Odometer, Trip ..........3-33 Park Aid ............2-44 Off-Road Driving ..........4-13 Park Brake ............ 2-35 Off-Road Recovery .......... 4-11 Park (P) Shifting Into ..........2-36 Engine ............5-13 Shifting Out of ..........2-37 Pressure Gage ..........
Page 498 Power (cont.) Rear Seat Audio (RSA) ........3-115 Seat ............1-2 Rear Seat Entertainment System ..... 3-105 Steering Fluid ..........5-34 Rear Side Window Antenna ......3-119 Windows ............ 2-20 Rear Storage Area .......... 2-60 Privacy ............7-15 Rear Windshield Washer/Wiper ......3-12 Event Data Recorders ........
Page 499 Retained Accessory Power (RAP) ...... 2-27 Seats (cont.) Roadside Power Lumbar ..........1-3 Assistance Program ........7-6 Power Reclining Seatbacks ......1-6 Rocking Your Vehicle to Get it Out ....4-32 Power Seats ..........1-2 Routing, Engine Drive Belt ....... 6-15 Third Row Seat ...........
Page 500 Spare Tire (cont.) Storing ............5-94 Tachometer ............ 3-33 Speciﬁcations, Capacities ....... 5-114 Taillamps Speedometer ..........3-33 Turn Signal, Stoplamps and Back-up Lamps ..5-51 Split Bench Seat (60/40) ........1-9 ® Theft-Deterrent, Radio ........3-116 StabiliTrak System .......... 4-6 ®...
Page 501 Tires (cont.) Trailer Inﬂation - Tire Pressure ........ 5-60 Recommendations ........4-55 Inspection and Rotation ........ 5-67 Transmission Installing the Spare Tire ........ 5-85 Fluid, Automatic ........... 5-20 Pressure Monitor Operation ......5-64 Transmission Operation, Automatic ....2-30 Pressure Monitor System ......5-62 Trip Odometer ..........
Page 502 Vehicle Data Recording and Privacy ....7-15 Where to Put the Restraint ....... 1-58 Vehicle Identiﬁcation Windows ............2-19 Number (VIN) ..........5-107 Power ............2-20 Service Parts Identiﬁcation Label ....5-107 Windshield Vehicle, Remote Start ........2-8 Backglass, and Wiper Blades, Cleaning ..5-103 Ventilation Adjustment ........

This manual is also suitable for:

2008 yukon xl denali

GMC 2008 Yukon Denali Owner's Manual

Section 1 Seats and Restraint Systems

Child Restraints

Airbag System

Restraint System Check

Section 2 Features and Controls

Keys

Doors and Locks

Windows

Theft-Deterrent Systems

Starting and Operating Your Vehicle

Mirrors

Object Detection Systems

Onstar System

Universal Home Remote System

Storage Areas

Sunroof

Section 3 Instrument Panel

Instrument Panel Overview

Climate Controls

Warning Lights, Gages, and Indicators

Driver Information Center (DIC)

Audio System(S)

Section 4 Driving Your Vehicle

Your Driving, the Road, and Your Vehicle

Towing

Quick Links

Chapters

Related Manuals for GMC 2008 Yukon Denali

Summary of Contents for GMC 2008 Yukon Denali