GMC 2008 Envoy Denali Owner's Manual page 247

Notice: If the StabiliTrak
heavy braking and/or because the traction control
system has been continuously active, do not allow
the wheel(s) of one axle to spin excessively. If you
do, you may be causing damage to the transfer case.
This could lead to costly repairs not covered by your
warranty.
Notice: If you allow the wheel(s) of one axle to spin
excessively while the StabiliTrak
warning lights and the SERVICE STABILITRAK
message are displayed, you could damage the
transfer case. The repairs would not be covered by
your warranty. Reduce engine power and do not spin
the wheel(s) excessively while these lights and this
message are displayed.
®
StabiliTrak may activate on dry or rough roads or
under conditions such as heavy acceleration while
turning or abrupt upshifts/downshifts of the transmission.
When this happens, you may notice a reduction in
acceleration, or may hear a noise or vibration.
This is normal.
®
light comes on due to
®
, ABS and brake
If your vehicle is in cruise control when the system
activates, the StabiliTrak
cruise control will automatically disengage. When
road conditions allow, you may re-engage the cruise
control. See Cruise Control on page 3-11.
®
StabiliTrak will turn off automatically if a problem is
detected in the system. The StabiliTrak
on and SERVICE STABILITRAK will be displayed on
the DIC. For vehicles without a DIC, the StabiliTrak
®
light and the StabiliTrak
If the SERVICE STABILITRAK message (or StabiliTrak
service light) does not clear itself after restarting the
vehicle, you should see your dealer for service.
Adding non-GM accessories can affect your vehicle's
performance. See Accessories and Modifications
on page 5-3 for more information.
®
light will blink, and the
®
light will come
service light will both come on.
®
®
4-9