Memory Seat, Mirrors, And Pedals - GMC 2007 Yukon XL Owner's Manual

Memory Seat, Mirrors, and Pedals

Your vehicle may have the memory package.
To save your positions in memory, do the following:
1. Adjust the driver's seat, including the
seatback recliner and lumbar, both outside
mirrors, and the throttle and brake pedals to a
comfortable position.
See Outside Power Mirrors on page 164 and
Adjustable Throttle and Brake Pedal on
page 140 for more information.
Some mirrors might not function with the
memory feature.
The controls for this
feature are located on
the driver's door
panel, and are used to
program and recall
memory settings for the
driver's seat, outside
mirrors, and the
adjustable throttle and
brake pedal feature
if your vehicle has it.
2. Press and hold button 1 until two beeps
sound through the driver's front speaker
to let you know that the position has been
stored.
A second seating, mirror, and throttle and brake
pedal position can be programmed by repeating
the above steps and pressing button 2.
To recall the memory positions, the vehicle must
be in PARK (P). Press and release either button 1
or button 2 corresponding to the desired driving
position. The seat, outside mirrors, and adjustable
throttle and brake pedals will move to the position
previously stored. You will hear a single beep.
If you use the remote keyless entry transmitter to
enter your vehicle and the remote recall memory
feature is on, automatic seat, mirror, and
adjustable pedal movement will occur. See
"MEMORY SEAT RECALL" under DIC Vehicle
Customization (With DIC Buttons) on page 264
for more information.
To stop recall movement of the memory feature at
any time, press one of the power seat controls,
memory buttons, power mirror buttons, or
adjustable pedal switch.
13