Washing Your Vehicle; Cleaning Exterior Lamps/Lenses; Finish Care - GMC 2007 Yukon XL Owner's Manual

Washing Your Vehicle

The paint finish on the vehicle provides beauty,
depth of color, gloss retention, and durability.
The best way to preserve the vehicle's finish is to
keep it clean by washing it often with lukewarm
or cold water.
Do not wash the vehicle in the direct rays of the
sun. Use a car washing soap. Do not use
strong soaps or chemical detergents. Be sure to
rinse the vehicle well, removing all soap
residue completely. GM-approved cleaning
products can be obtained from your dealer. See
Vehicle Care/Appearance Materials on page 537.
Do not use cleaning agents that are petroleum
based, or that contain acid or abrasives. All
cleaning agents should be flushed promptly and
not allowed to dry on the surface, or they
could stain. Dry the finish with a soft, clean
chamois or an all-cotton towel to avoid surface
scratches and water spotting.
High pressure car washes may cause water to
enter the vehicle.
532

Cleaning Exterior Lamps/Lenses

Use only lukewarm or cold water, a soft cloth and
a car washing soap to clean exterior lamps
and lenses. Follow instructions under Washing
Your Vehicle on page 532.

Finish Care

Occasional waxing or mild polishing of your
vehicle by hand may be necessary to remove
residue from the paint finish. You can get
GM-approved cleaning products from your dealer.
See Vehicle Care/Appearance Materials on
page 537.
If your vehicle has a "basecoat/clearcoat" paint
finish, the clearcoat gives more depth and gloss to
the colored basecoat. Always use waxes and
polishes that are non-abrasive and made for a
basecoat/clearcoat paint finish.