Memory Seat, Mirrors, And Pedals - GMC 2007 Yukon Denali Owner's Manual

Memory Seat, Mirrors, and Pedals

Your vehicle has the memory package.
12
The controls for this
feature are located on
the driver's door
panel, and are used to
program and recall
memory settings for the
driver's seat, outside
mirrors, and the
adjustable throttle and
brake pedal feature
if your vehicle has it.
To save your positions in memory, do the following:
1. Adjust the driver's seat, including the
seatback recliner and lumbar, both outside
mirrors, and the throttle and brake pedals to a
comfortable position.
See Outside Power Foldaway Mirrors on
page 160 and Adjustable Throttle and Brake
Pedal on page 143 for more information.
Not all mirrors will have the ability to save and
recall the mirror positions.
2. Press and hold button 1 until two beeps let
you know that the position has been stored.
A second seating, mirror, and throttle and brake
pedal position can be programmed by repeating
the above steps and pressing button 2.
To recall the memory positions, the vehicle must be
in PARK (P). Press and release either button 1 or
button 2 corresponding to the desired driving
position. The seat, outside mirrors, and adjustable
throttle and brake pedals will move to the position
previously stored. You will hear a single beep.