Underhood Lamp; Vanity Mirror Lamps - GMC 1996 Sonoma Owner's Manual

Underhood Lamp
I . Disconnect the electrical connector from the
underhood lamp assembly.
2. Remove the screws.
3. Disconnect the ground wire.
4. Remove the lamp assembly from the hood.
5 . Install the new bulb.
6. Replace the assembly. Install and tighten the screws.
7. Connect the ground wire.
8. Connect the electrical connector to the lamp assenlbly.
Vanity Mirror Lamps
I . Insert the blade of a small screwdriver into the center
slot
at the bottom of the lens.
2. Gently pry the screwdriver down in order
t o lift out
the lens.
3. Pry out the bulb.
4. Press the new bulb into place.
5 . Slide the side
tabs
of the lens under the side of the
vanity assembly frame.
6. Rotate the lens downward.
7. Snap the lens
into
the frame.
6-41