Chevrolet 2003 Venture Owner's Manual page 28

Make sure the seats are in the full rear position before
beginning this procedure.
1. With the seat folded, squeeze the angled bar
toward the straight crossbar while placing the
front hooks of the bucket seat onto the front two
floor pins.
2. Make sure the bucket
seat is angled so that
the front hooks
clear the floor pins.
3. If the front legs are not attached correctly, the rear
legs will not attach to the rear set of floor pins.
If the front latches are not attaching correctly, check
that the seat is in the full rear position.
4. Firmly push the rear hooks onto the rear floor pins
5. Try to raise the seat to check that it is locked down.
by pushing down the rear of the seat.
6. Lift the seatback recliner lever or pull the nylon
strap on the back of the seat and raise the
seatback urliii ii imks upriyiii.
is locked in place.
7. Push and pull on the seatback to make sure that it
1-21