Chevrolet 2003 Venture Owner's Manual page 18

To return the seatback to an upright position, pull on the
nylon strap or lift the recliner lever without putting any
pressure on the seatback. Push and pull on the
seatback to be sure it is locked into place.
Removing the Split Bench Seat
Make sure the seatback is in the upright position.
1. For the second row split bench, with the seatback
in the upright position, unhook the side attachment
for the safety belt. This mini-buckle is located
on the right side of the seat.
2. Push the red center
of the buckle up with
a small pointed
object -like a key or
a pen
-
to remove the
seat belt, if needed.
4. If the seat is in the second row, lift one sf the
adjustment levers and slide the seat fully rearward.
5. From behind the bench seat, pull the nylon strap at
the center of the base of the seat to release the
rear latches from the floor pins.
Do not let go of the strap until the seat is folded all
the way forward.
3. Lift the seatback recliner lever or pull the nylon
strap on the back of the seat to fold the seatback
101
waru.
L -..--A
1-1 1