Stir Motor; Heater Du (Steam Heater) - Panasonic NN­GS595A Service Manual

10/24/2016
4.10 Stir motor
1. Remove tubes from both ends of copper pipe.
2. Remove 1 screw holding air guide B on the base.
3. Remove left and right door key springs from door arm.
NOTE:
Please support door before operation.
4. Turn over the microwave oven and remove all screws holding base on oven assy & two hinges.
NOTE:
Do not remove two screws holding left and right hinge on the bottom of cavity front plate.
5. Remove base from oven assy.
6. Disconnet 2 lead wires from stir motor terminals.
7. Remove 2 screws holding stir motor.
4.11 Heater DU (steam heater)
1. Remove tubes from both ends of copper pipe.
2. Remove 1 screw holding air guide B on the base.
3. Remove left and right door key springs from door arm.
NOTE:
Please support door before operation.
4. Turn over the microwave oven and remove all screws holding base on oven assy & two hinges.
NOTE:
Do not remove two screws holding left and right hinge on the bottom of cavity front plate.
5. Remove base from oven assy.
6. Disconnect 2 lead wires from heater DU terminals.
7. Remove 1 screw holding thermistor on heater DU.
8. Remove 4 screws holding heater DU & thermal cutout bracket on the bottom of oven assy.
To install heater DU
NOTE:
file:///C:/Users/sh.dehghani/Desktop/NN­GS595AOTSVC_PHAMOS0511035C3/viewing/SGML_VIEW_DATA/OT/NN­GS595A/SVC/PHAMOS0511035C3/inde...
XML Service Manual
8/9