Avoid Inserting Nails, Wire Etc. Through Any Holes In The Unit During Operation; Confirm After Repair; Sharp Edges - Panasonic NN­GS595A Service Manual

10/24/2016
3. When replacing faulty switches, be sure the mounting tabs are not bent, broken or deficient in their ability to hold the
switches.
3.5 Avoid inserting nails, wire etc. through any holes in
the unit during operation
Never insert a wire, nail or any other metal object through the lamp holes on the cavity or any holes or gaps, because such objects
may work as an antennaand cause microwave leakage.
3.6 Confirm after repair
1. After repair or replacement of parts, make sure that the screws of the oven, etc. are neither loosen or missing.
Microwave might leak if screws are not properly tightened.
2. Make sure that all electrical connections are tight before inserting the plug into the wall outlet.
3. Check for microwave energy leakage. (Refer to procedure for measuring microwave energy leakage).
CAUTION MICROWAVE RADIATION
USE CAUTION NOT TO BECOME EXPOSED TO RADIATION FROM THE MICROWAVE MAGNETRON OR OTHER PARTS
CONDUCTING MICROWAVE ENERGY.
IMPORTANT NOTICE
The following components have potentials above 2000V while the appliance is operated.
Magnetron
High voltage transformer (Located on inverter (U))
High voltage diodes (Located on inverter (U))
High voltage capacitors (Located on inverter (U))
Pay special attention to these areas.
When the appliance is operated with the door hinges or magnetron installed incorrectly, the microwave leakage can exceed more
than 5mW/cm2. After repair or exchange, it is very important to check if the magnetron and the door hinges are correctly installed.
3.7 Sharp edges
Caution
Please use caution when unpacking, installing or moving the unit, as some exposed edges may be sharp to the touch and cause
injury if not handled with care.
file:///C:/Users/sh.dehghani/Desktop/NN­GS595AOTSVC_PHAMOS0511035C3/viewing/SGML_VIEW_DATA/OT/NN­GS595A/SVC/PHAMOS0511035C3/inde...
XML Service Manual
3/3