Trouble) Oven Stops Operation During Cooking - Panasonic NN­GS595A Service Manual

Table of Contents

Advertisement

10/24/2016
H02
Memory IC error (It is able to show up both in test mode and cooking mode)
SYMPTOM
SYMPTOM
H00
RAM failure (It is able to show up both in test mode and cooking mode)
H20
Steam heater open error
U14
No water during steam cooking (It is able to show up both in test mode and cooking mode)
U40
No load operation
U65
Power down controlled by magnetron thermistor
HOT
Oven is hot (It is able to show up both in test mode and cooking mode)
7.1 (Trouble) Oven stops operation during cooking
SYMPTOM
Oven  stops  in  3  seconds  after
pressing start pad.
1.
Oven  stops  in  23  seconds  after
pressing start pad.
Oven stops in 1 minute after pressing
start pad. (Oven cooking)
Oven  stops  in  30  seconds  after
pressing start pad. (Steam cooking)
No display and no operation at all.
2.
Fuse is blown.
7.2 (Trouble) Other troubles
SYMPTOM
Oven is dead.
Fuse is OK.
1.
No display and no operation at
all.
file:///C:/Users/sh.dehghani/Desktop/NN­GS595AOTSVC_PHAMOS0511035C3/viewing/SGML_VIEW_DATA/OT/NN­GS595A/SVC/PHAMOS0511035C3/inde...
XML Service Manual
CAUSE
Usage problem
No  input  AC  is  supplied  to  H.V.Inverter  (U)  CN702
terminals
H.V.Inverter  (U)  operates  by  the  control  signals  from
DPC but magnetron is not oscillating
Oven thermistor circuit is not functions.
Steam heater thermistor circuit is not functions.
Most probably loose connection of connectors, or door
latch mechanism is not adjusted properly
CAUSE
1. Open or loose lead wire harness
2. Open thermal cutout
3. Open low voltage transformer
4. Defective DPC
1. Shorted lead wire harness
CAUSE
CAUSE
Check fan motor if thermal cutout is
defective.
CORRECTIONS
CORRECTIONS
CORRECTIONS
1. Latch Switch
2. Power relay RY­1
3.  Loose  lead  wire  connector
CN701, CN702
1. Magnetron
2.  Loose  lead  wire  connector
CN703
1. Oven thermistor
2. Loose wiring
1. Steam heater thermistor
2. Loose wiring
3.  bad  conductibility  between
thermistor and steam heater
1.  Align  door,  Door  Latch
Switches
2. Loose wiring connectors
CORRECTIONS
2/6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents