Display - Pioneer VSX-1024 Operating Instructions Manual

1
1
ALC/STANDARD SURR (VSX-1024 only) – Press for
standard decoding and to switch between the modes of
Pro Logic II, Pro Logic IIx,
NEO:6, and the Auto level control stereo mode
(VSX-824 only) – Press for
ALC/STANDARD SURR
standard decoding and to switch between the modes of
Pro Logic II and NEO:6, and the Auto level control
stereo mode (page 37).
ADVANCED SURROUND – Switches between the various
surround modes (page 38).
15 ECO
Switches between ECO Mode 1/ECO Mode 2. When ECO
Mode is turned ON, the display will go dark
16 iPod iPhone DIRECT CONTROL
Change the receiver's input to the iPod and enable iPod
operations on the iPod (page 32).
17
iPod/iPhone terminals
Use to connect your Apple iPod/iPhone or USB mass storage
device as an audio source (page 24).
18
HDMI INPUT connector
Use for connection to a compatible HDMI device (Video
camera, etc.) (page 25).

Display

19
PHASE
Lights when the Phase Control is switched on.
20
AUTO
Lights when the Auto Surround feature is switched on
(page 37).
21
Tuner indicators
ST – Lights when a stereo FM broadcast is being received
in auto stereo mode (page 36).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is registered
or called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing
the currently received AM/FM broadcast frequency.
22
ZONE (VSX-1024 only)
Lights when the MULTI-ZONE feature is active
Pro Logic IIz and
23
Speaker indicators
(page 37).
Shows if the speaker system is on or not
24
Sleep timer indicator
Lights when the receiver is in sleep mode
25
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type,
etc.
26
Character display
Displays various system information.
27
DTS indicators
(page 38).
DTS – Lights when a source with DTS encoded audio
signals is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
ES – Lights to indicate DTS-ES decoding.
96/24 – Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is
on, this lights to indicate NEO:6 processing
28
Dolby Digital indicators
D – Lights when a Dolby Digital encoded signal is
detected.
D+ – Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
HD – Lights when a source with Dolby TrueHD
encoded audio signals is detected.
EX (VSX-1024 only) – Lights to indicate Dolby Digital EX
decoding.
PLII(x) (VSX-1024 only) – Lights to indicate
Logic II decoding. Light will go off during
decoding (see Listening in surround sound on page 37
more on this).
PLII (VSX-824 only) – Lights to indicate
II decoding. (see
for more on this).
(page 58).
(page 18).
(page 11).
(page 37).
Pro
Pro Logic IIz
for
Pro Logic
Listening in surround sound on page 37
10
Controls and displays
29
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see Using the Advanced surround on page 38
more on this).
30
SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and selected
audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI input
is not provided.
31
Up Mix indicator (VSX-1024 only)
Lights when the Up Mix function is set to ON
32
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched
on (page 38).
4
for
9
61
(page 39).