Pioneer VSX-1024 Operating Instructions Manual page 29

4
4
• When digital input (optical or coaxial) is selected, this
receiver can only play back Dolby Digital, PCM (32 kHz to
96 kHz) and DTS (including DTS 96 kHz/24 bit) digital signal
formats. The compatible signals via the HDMI terminals
are: Dolby Digital, DTS, SACD (DSD 2 ch only), PCM
(32 kHz to 192 kHz sampling frequencies), Dolby TrueHD,
Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio
and DVD Audio (including 192 kHz). With other digital
signal formats, set to A (analog).
• You may get digital noise when a LD or CD player
compatible with DTS is playing an analog signal. To prevent
noise, make the proper digital connections
set the signal input to C1/O1 (digital).
• Some DVD players don't output DTS signals. For more
details, refer to the instruction manual supplied with your
DVD player.
Tip
• In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following.
VSX-1024
(page 19) and
Video
SAT/CBL DVD
TUNER
Video (VSX-1024 only)
Reassignable
DVD
(page
Video/Audio (HDMI)
DVD SAT/CBL BD GAME MHL
ADAPTER
Audio
DVD
Audio
CD TV
RECEIVER
SIGNAL SEL
55)
CTRL S.SEL
29
NETWORK
Audio
1.
TV
(TV input)
Other than TV input
2.
RECEIVER SIGNAL SEL
O1
CTRL S.SEL
Audio
DVD
RECEIVER
CTRL
SAT/CBL
RECEIVER
SIGNAL SEL
A
A
S.SEL
CTRL
ANALOG IN1 audio input terminal is
assigned to CD under factory settings. If
you want to change this to TV input,
A
please change the settings in the Input
Assign menu (page 55).
Basic playback
4
9
61
MHL CD TV
SIGNAL SEL
C1
S.SEL