Panasonic PressIT TY-WPS1W Operating Instructions (Functional Manual) page 49

4
Attach 1 sheet A (B-1) and 3 sheets B (B-2) to the brackets along the marking-off
lines
Remove the double-sided taped release paper from those sheets and attach them to the brackets. Then remove
the protection films.
Protection film
Release paper
5
Install the receiver on the display.
Loosen 2 knurled screws (C-1).
Hang the tip of the mounting bracket on the display.
Hold the display with the mounting bracket to install the receiver.
Tighten 2 knurled screws (C-1).
B-2
C-1
B-2
B-1
English 49 49