Panasonic PressIT TY-WPS1W Operating Instructions (Functional Manual) page 35

●
Screen Saver
Specifies the time until the screensaver is activated.
When the screensaver is activated, the image being projected disappears.
Pressing the main button of the transmitter cancels the screensaver.
●
WPA/WPA2 Enterprise
Using this function, an electronic certificate key file supporting encryption communication can be uploaded. This
function is designed for persons in charge of information system department and network administrators.
●
Upgrade
The firmware of the receiver and transmitter can be to the latest versions. This
product needs to be stably connected to Internet to upgrade the firmware.
It is strongly recommended to use the same firmware version for the receiver
and transmitter upgraded of this product.
The firmware can be upgraded with the following method.
Connect the transmitter to an external power source.
Confirm that the receiver is connected to Internet and the receiver and
transmitter have been paired.
Click the [Select All] check box to upgrade all the firmware of the receiver
and transmitter collectively.
Tap the [Update] button to start downloading the latest firmware. This
process will finish in a few minutes. Please wait for a while.
Note
• The firmware upgrade information displayed for [Upgrade] on the [Detail
Settings] menu shows the confirmation result of the receiver version.
• When the firmware upgrade for the receiver is available, a mark to prompt
you to upgrade the firmware is displayed on the receiver at the lower right of
the standby screen.
English 35