Panasonic PressIT TY-WPS1W Operating Instructions (Functional Manual) page 36

Setting
Continued
●
Download Pairing File
Download the pairing file and save it on a USB flash drive.
After downloading is complete, perform step 5 and the subsequent steps in "Pairing by saving a file to the USB
memory" (page 21) to copy the pairing file to the transmitter.
The receiver and transmitter of the TY-WPS1/TY-WPS1W basic set are paired at the time of shipment. When the
transmitter is initialized or a new transmitter is additionally purchased, pairing with the receiver is required before
using.
●
Background Color setting
Specifies the background colors for the standby screen and no-signal image.
[Black] or [Blue] can be specified.
Note
• When the [My Screen] is specified, this setting is not reflected.
●
Date/Time setting
●
Reboot
36 English
Specifies the time zone and the display style of date displayed on the standby
screen.
Date Format:
Refer to [Date/Time setting] (page 41).
Time Server:
Sets the NTP saver.
When the NTP server is not specified, a server registered beforehand is
accessed.
Date and time shows the following information.
1. Information obtained from the NTP server via wireless LAN or wired LAN of
the receiver (priority)
2. Information from HDMI-CEC of the corresponding display or projector
Restart the product when the firmware is upgraded to the latest version or the
receiver does not respond.
Tap [Reboot] and select [YES].