Panasonic PressIT TY-WPS1W Operating Instructions (Functional Manual) page 42

Setting
Continued
■
HDMI-CEC settings
Set for HDMI-CEC function.
For details of HDMI-CEC function, refer to "Using the HDMI-CEC function". (see page 43)
[HDMI-CEC settings] - submenu screen
HDMI-CEC settings
HDMI-CEC control
HDMI1
HDMI2
SLOT ----
HDMI-CEC operation
MENU code
Link function
Display → Device
Device → Display
●
[HDMI-CEC control]
Enables/Disables the HDMI-CEC function.
[Disable]: Disables HDMI-CEC control.
[Enable]: Enables HDMI-CEC control.
Note
• Setting this item to [Enable] enables the HDMI-CEC function for this product and display.
●
[HDMI1] / [HDMI2]
[PressIT] is displayed for a terminal to which this product is connected.
●
[MENU code]
No code is assigned to this system.
●
[Display → Device]
Enables/Disables the Display to perform interlocking control of the HDMI-CEC compatible device.
[Disable]:
[Power off]:
[Power off / on]: The device turns off/on (standby) in conjunction with the power-off/on (standby) operation of the
●
[Device → Display]
Enables/Disables the HDMI-CEC compatible device to perform interlocking control of the Display.
[Disable]:
[Power on]:
[Power off / on]: The power status of the Display interlocks with the power-off/on operation of the device.
42 42 English
Enable
----
----
1 1
Disable
Disable
Disables the Display to perform interlocking control of the HDMI-CEC compatible device.
Even if the power status of the Display changes, the power status of the device will not be
affected.
Turning the Display off (standby) turns off (standby) all the devices connected to the HDMI 1,
HDMI 2 or SLOT terminal. The power-on operation is not interlocked.
Display.
Disables the device to perform interlocking control of the Display.
Even if the power status of the device changes, the power status of the Display will not be
affected.
Turning on the device turns on the Display, and the input (HDMI1 / HDMI2 / SLOT) is switched to
that of the device.