Chevrolet 1998 Tracker Owner's Manual page 103

Removing and Installing Your
Rear Window
The
rear
window of your vehicle is removable. This
allows you to open the back opening all the way or to
replace the window if it becomes deteriorated. To
remove the rear window:
1. Open the rear gate
all
the way.
2. Unfasten the canvas flaps at the lower corners of
the rear window to uncover the zipper pull.
3. Unzip the rear window.
4. Hang the rear window down so it hangs outside of
5 . Push the clip on the driver's side of the rear window
frame (see illustration above) and pull the bar
rearward. Then slide the bar to the left to release the
passenger's side.
the vehicle.
Reverse the steps to install the rear window. Make sure
that the window is completely closed before driving.
2-44