Table of Contents
Advertisement
4. Remove the bulb from the socket.
5. Reverse the steps with a new bulb.
Back-up Lamps
You can access the back-up lamps through the inboard
taillamp opening. See "Rear Turn Signal and Taillamps"
in the Index.
1. Squeeze the tab on the socket while turning it to the
2. Remove the bulb from the socket.
left to remove it from the assembly.
3. Reverse the steps with a new bulb.
For any bulb replacement procedures not listed here,
please see your dealership.
Windshield Wiper Blade
Replacement
It's a good idea to clean or replace the wiper blade
assembly every six months. For the proper windshield
wiper blade length and type, see "Replacement Parts" in
the Index.
NOTICE:
Use care when removing or installing a blade
assembly. Accidental bumping can cause the arm
to fall back and strike the windshield.
To remove the wiper blade assembly:
1. Open the hood to gain access to the
windshield wipers.
2. Lift the wiper arm until it locks into a
vertical position.
6-37
Advertisement
Table of Contents
