Table of Contents
Advertisement
'hip Odometers
Elapsed Time
There are two trip odometers. Press the TRIP button and
TRIP A will be displayed. Press
it again and TRIP B
will be displayed. TRIP A could be used to track the
distance to a destination. TRIP B could be used to track
maintenance periods.
TRIP A 130.5 MI or
TRIP A 209.9 km
TRIP B 300.5 MI or
0
TRIP B 483.5
km
The trip odometers can be reset by pushing the RESET
button on the DIC. Both of the trip odometers can be
used simultaneously.
Miles Since Last Ignition Feature
You can also display number of miles driven since you
last started the car if you press and hold the RESET
button for two seconds, then release. The miles (or
kilometers) since the last ignition cycle will be set
into
the trip odometer.
Press the TRIP button until ELAP. TIME is displayed,
such as ELM. TIME 00: 00
:
00.
When the ignition is in the ON position, the DIC can be
used as a stopwatch. The display can show hours,
minutes, seconds and hundredths of a second. The
elapsed time indicator will record up to 99 hours,
59 minutes and 59 seconds, then it will reset to zero and
continue counting. (Hundredths are shown up to
59 minutes, 59 seconds and 99 hundredths). The display
appears as ELAP. TIME 00: 00
:
00 in the elapsed
time function.
You can start or stop the elapsed time
by pressing
RESET. To reset the elapsed time to zero, stop the timer
by pressing RESET. Then press and hold RESET for
two seconds and release.
2-92
Advertisement
Table of Contents
