Table of Contents
Advertisement
However, if you accidentally use a key that has a
damaged or missing resistor pellet, you will see no
SECURITY light. You don't have to wait three
minutes before trying the proper key.
If the resistor pellet is damaged or missing, the starter
won't work. Use the other ignition key, and see your
Chevrolet dealer or a locksmith who can service the
PASS-Key to have a new key made.
If the SECURITY light comes on while driving, have
your vehicle serviced as soon as possible.
If you lose or damage a PASS-Key ignition key, see
your Chevrolet dealer or a locksmith who can service
PASS-Key. In an emergency, call the Chevrolet
Roadside Assistance Center at 1 -800-CHEV-USA
(1-800-243-8872). In Canada, call 1-800-268-6800.
New Vehicle "Break-In"
NOTICE:
Your modern Corvette doesn't need an elaborate
"break-in." But it will perform better in the long
run if you follow these guidelines:
0
Keep your speed at
55
mph (88 km/h) or
less for the first 500 miles (805 km).
0
Don't drive at any one speed
--
fast or
slow
--
for the first 500 miles (805 km).
Don't make full-throttle starts.
200 miles (322 km) or so. During this time
your new brake linings aren't yet broken
in. Hard stops with new linings can mean
premature wear and earlier replacement.
Follow this breaking-in guideline every
time you get new brake linings.
0
Avoid making hard stops for the first
2-19
Advertisement
Table of Contents
