Replacing Your Battery
1. Insert a coin into the slot on the back of the
transmitter and gently pry apart the front and back.
2. Gently pull the battery out of the transmitter.
3. Put the new battery in the transmitter, positive
(+)
side up. Use a battery, type CR2450, or equivalent.
Make sure to put it together in the correct order so
water won't get in.
"Resynchronizing Your Transmitter" under Remote
Function Actuation System earlier in this section.)
4. Reassemble the transmitter in the order shown.
5. Resynchronize the transmitter. (See
6. Test the transmitter.
2-13