Mazda B2300 2001 Manual page 31

2. Working within the upper slot, rotate
and fold the belt webbing over itself
as required to remove the twist.
3. Pull the excess belt webbing back
through the upper slot in the tongue.
4. Repeat the above steps to complete
the removal of the twist at the lower
(wider and larger) slot in the tongue.
5. When completed, the seat belt should
look like the second figure on page
2-16.
Essential Safety Equipment
J
Seat Belt Extender
If your seat belt is not long enough, even
when fully extended, your Authorized
Mazda Dealer can provide you with a
seat belt extender. It is free. The extender
will be only for you and for the particular
vehicle and seat that you choose. When
ordering an extender, only order one that
provides the necessary additional length
to fasten the seat belt properly. Please
contact your Authorized Mazda Dealer
for more information.
2-17