Mazda B2300 2001 Manual page 186

Driving Your Mazda
t To Cancel:
To turn off the system, use one of these
methods:
S Press the OFF switch. The cruise
control is cancelled.
S Press the brake or clutch pedal (if
equipped) slightly. The cruise control
is turned off, but can be reset by
pressing SET ACCEL or RSM.
WARNING
Avoiding High Engine RPM:
Do not shift the transmission into
N (Neutral) with the cruise control
on, as high engine RPM run up will
occur until the cruise control is
turned off.
5-50
The system is off when the ignition is off.
NOTE
Cruise control will cancel at about
8 to 14 mph (13-23 km/h) below the
preset speed.
J
To Increase Cruising Speed:
Follow either of these procedures.
S Press and hold SET ACCEL. Release
the control when the desired speed is
reached.
S Accelerate with your accelerator
pedal. When the desired vehicle
speed is reached, press and release
SET ACCEL.
Your vehicle has a ''tap-up'' feature that
allows you to increase your current
speed in increments of 1 mph (1.6 km/h)
by a momentary tap of the SET ACCEL
button. Multiple taps of the SET ACCEL
button will increase your vehicle speed
1 mph (1.6 km/h) for each tap. For exam-
ple, if you are currently set at 60 mph
(96 km/h) and tap the SET ACCEL
button 5 times, your vehicle speed will
increase and set at 65 mph (104 km/h).