To Remove the Old Wiper Blade:
*
Lift the wiper arm until it locks into a vertical position.
1.
Blade Assembly
2. Arm Assembly
3. Locking Tab
4. Blade Pivot
5. Hook Slot
6 . Arm Hook
Press down on the blade assembly pivot locking tab.
Pull down on the
blade assembly to release it from the wiper
arm
hook.
Kemove the insert from the blade assembly. The insert has two notches
at one end that are locked by bottom claws of the blade assembly. At
the notched end, pull the insert from the blade assembly.
6-40
t
- :
.
L
.
. .