Rear Lights - Chevrolet 1994 S-10 Pickup Owner's Manual

Rear Lights
1. Open the tailgate.
2. Remove the light
assembly screws
near the tailgate
latch and pull out
the light
assembly.
3. Pull the light
assembly away
from
the pickup
side panel.
4. T u r n the socket to
the
left to remove
it. Push the tab in
while you turn
the socket.
5. Pull the bulb out.
6. Push the new bulb into the socket.
7. Put the socket into the light assembly and turn the socket to the right
until it locks in place.
8. Replace the light assembly. Install and tighten the screws.
9. Close the tailgate.
6-37