Table of Contents
Advertisement
4.
Turn on the power of the printer.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
5.
Click [Devices and Printers].
6.
Double-Click the icon of printer you want to use in the [Unspecified] category.
7.
Click [Hardware] tab.
8.
Click [Properties].
9.
Click [General] tab.
10.
Click [Change settings].
11.
Click [Driver] tab.
12.
Click [Update Driver...].
13.
Click [Browse my computer for driver software].
14.
Insert the CD-ROM into the CD-ROM drive.
If Auto Run starts, click [Cancel] and then click [Exit].
15.
Click [Browse...], and then select the printer driver location.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
• Windows 7
• D:\DRIVERS\PCL6\XP_VISTA\MUI\disk1
• Windows Server 2008 R2
• D:\DRIVERS\PCL6\x64\MUI\DISK1
The PCL6 printer driver will be installed in the language of the operating system.
16.
Check the printer driver location, and then click [Next].
17.
Click [Close].
If the installation is successful, the icon of the printer connected to the "USB001" port is added to the
[Devices and Printers] window.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
• The number after "USB" varies depending on the number of printers connected.
Installing the Printer Driver Using USB
3
45
Advertisement
Table of Contents
