Advertisement
As you brake, your computer keeps receiving updates on wheel speed and
controls braking pressure accordingly.
Remember: Anti-lock doesn't change the time you need to get your foot
up to the brake pedal. If you get too close to the vehicle in front of you,
you won't have time to apply your brakes if that vehicle suddenly slows or
stops. Always leave enough room up ahead to stop, even though you have
anti-lock brakes.
To Use Anti-Lock
Don't pump the brakes. Just hold the brake pedal down and let anti-lock
work for you. You may hear the anti-lock pump or motor operate, and
feel the brake pedal pulsate, but this is normal.
Traction Control System (Option)
Your vehicle may have a traction control system that limits wheel spin.
This is especially useful in slippery road conditions. The system operates
only if it senses that one or both of the front wheels are spinning or
beginning to lose traction. When this happens, the system works the front
brakes and reduces engine power (by shutting off fuel injectors) to limit
wheel spin.
The "TRACTION ACTIVE" message will display on the Driver
Information Center when the traction control system is limiting wheel
spin. See "Driver Information Center Messages" in the Index. You may
feel the system working, or you may notice some noise, but this is normal.
If your vehicle is in cruise control when the traction control system begins
to limit wheel spin, the cruise control will automatically disengage. When
road conditions allow you to safely use it again, you may re-engage the
cruise control. (See "Cruise Control" in the Index.)
The "TRACTION DISABLED" message will display on the Driver
Information Center if there's a problem with your traction control system.
See "Driver Information Center Messages" in the Index. When this
message is displayed, the system will not limit wheel spin. Adjust your
driving accordingly.
184
Advertisement
