Passenger Airbag Status Indicator - Buick 2008 Lucerne Owner's Manual

Hide thumbs Also See for 2008 Lucerne:
Table of Contents

Advertisement

If the airbag readiness light stays on after you start the
vehicle or comes on when you are driving, your
airbag system may not work properly. Have your vehicle
serviced right away.
CAUTION:
{
If the airbag readiness light stays on after you
start your vehicle, it means the airbag system
may not be working properly. The airbags in
your vehicle may not inflate in a crash, or they
could even inflate without a crash. To help
avoid injury to yourself or others, have your
vehicle serviced right away if the airbag
readiness light stays on after you start your
vehicle.
The airbag readiness light should flash for a few
seconds when you start the engine. If the light does not
come on then, have it fixed immediately. If there is a
problem with the airbag system, an airbag Driver
Information Center (DIC) message may also come on.
See DIC Warnings and Messages on page 3-56 for
more information.
3-36

Passenger Airbag Status Indicator

Your vehicle has the passenger sensing system.
Your overhead console has a passenger airbag status
indicator.
United States
When you start the vehicle, the passenger airbag status
indicator will light ON and OFF, or the symbol for on
and off, for several seconds as a system check. Then,
after several more seconds, the status indicator will
light either ON or OFF, or either the on or off symbol, to
let you know the status of the right front passenger's
frontal airbag and seat-mounted side impact airbag.
If the word ON or the on symbol is lit on the passenger
airbag status indicator, it means that the right front
passenger's frontal airbag and seat-mounted side impact
airbag are enabled (may inflate).
Canada

Advertisement

Table of Contents
loading

Table of Contents