Outside Power Mirrors - Buick 2008 Lucerne Owner's Manual

Compass Variance
Compass variance is the difference between earth's
magnetic north and true geographic north. If the mirror
is not adjusted for compass variance, the compass
could give false readings.
The mirror is set in zone eight upon leaving the factory.
It will be necessary to adjust the compass to
compensate for compass variance if the vehicle is
driven outside zone eight. Under certain circumstances,
such as a long distance, cross-country trip, it will be
necessary to adjust the compass variance.
To adjust for compass variance, do the following:
1. Find your current location and variance zone
number on the zone map. See Automatic Dimming
Rearview Mirror with OnStar
page 2-34 for map information.
2. Press and hold the on/off button until a zone
number appears on the display.
3. Once the zone number appears on the display,
press the on/off button quickly until you reach
the correct zone number. If C or CAL appears in
the compass window, the compass may need
calibration. See "Compass Calibration" listed
previously.
®
and Compass on

Outside Power Mirrors

Press the left or right side of the selector switch located
beneath the control pad to choose the left or right
mirror.
To adjust the mirror, press one of the four arrows
located on the control pad to move the mirror in the
direction you want it to go. Adjust each outside mirror so
that you can see a little of your vehicle, and the area
behind your vehicle.
The mirrors may also have an arrow that flashes when
the turn signal is used. See Turn and Lane-Change
Signals on page 3-8.
The controls for the
outside power mirrors are
located on the driver's
door armrest.
2-37