JVC FS-GD7 Service Manual page 17

3.1.10 Removing the power cord
(See Fig.27)
• Prior to performing the following procedure, remove the side
panel (R)/ (L), the top panel and the rear cover/ rear panel.
(1) Disconnect the wire from connector
(single) board.
(2) Pull the power cord stopper out in the direction of the arrow
and remove it from the base chassis.
CN901 on the power
Power (single) board
CN901
CN902
Base chassis
Power cord Power cord stopper
Fig.27
(No.MB355)1-17